Handlebar Removal

From GICLWiki

1. Remove controller from frame (Difficulty: 1, Time: 8 minutes, Tools: Screwdriver)

1.1. Remove plastic covering from frame (Difficulty: 1, Tools: Screwdriver)

1.2. Unscrew metal sheet enclosing controller (Difficulty: 1, Tools: Screwdriver)

2. Disconnect two wires attaching controller to handlebar (Difficulty: 1, Time: <1 minute, Tools: Hands)

3. Disconnect brake line from wheel (Difficulty: 2, Time: 10 minutes, Tools: Screwdriver, Allen Wrench)

3.1. Unscrew clamp attaching line to wheel (Difficulty: 1, Tools: Screwdriver)

3.2. Remove wire brake line from clamp (Difficulty: 2 Tools: Screwdriver, Allen Wrench)

4. Unscrew brake pad from front tire (Difficulty: 1, Time: 3 minutes, Tools: Screwdriver)

5. Pull off rubber handles from both sides of handlebar (Difficulty: 3, Time: 25 minutes, Tools: Hands, Pliers)

6. Unscrew reflector and remove from bar (Difficulty: 2, Time: 5 minutes, Tools: Screwdriver)

7. Unscrew brake and slide off handlebar (Difficulty: 1, Time: 3 minutes, Tools: Screwdriver)

8. Unscrew throttle slightly and slide off handlebar (Difficulty: 1, Time: 3 minutes, Tools: Screwdriver)

9. Disconnect vertical handlebar stand from horizontal handlebar (Difficulty: 1, Time: 3 minutes, Tools: Screwdriver)

9.1. Unscrew two screws from clamp (Difficulty: 1, Tools: Screwdriver)

9.2. Remove clamp and separate two components (Difficulty: 2, Tools: Screwdriver)