Group 6 - Gate 2 - Parts List

Final components list:

connectors:

Figure 1: a bolt and washer.

• 1 - 14 mm bolt-nut pair
• 1 - 14 mm bolt
• 2 - 14mm nut-bolt-washer pair
• 11 - 13 mm nut - bolt pair
• 6 - 13 mm bolt-washer pairs
• 16- 11 mm nut-bolt pair
• 2 - 11 mm bolt-washer pairs
• 2 - 11 mm nut-washer pairs
• 2 - 11 mm bolts
• 11 - mm washer
• 1 - 11mm bolt and nut pair
• 2 - 10 mm bolt-washer pair
• 13 -10 mm bolt nut pair
• 12 -10 mm screws
• 1 - 10 mm bolt-nut-washer
• 6 - 10 mm bolts
• 1 - 10 mm bolt-nut-washer
• 1 - 9 mm square screw
• 5 - 8 mm bolt
• 9 - 8 mm nuts
• 4 - 8 mm nut-bolt pairs
• 1 - 8 mm screw
• 2 - washer-bolt-nut pair
• 4 - washers( 2 per bolt-nut connection)
• 2 - nut-bolt washer pairs
• 5 washers
• 3 - flat head screw-nut pairs
• 9 - Phillips head screws
• 2 - Phillips head screw-nut pairs
• 2 - Phillips head screw-washer pairs
• 2 - Screw-washer-bolt pair
• 1 - Bearing -washer pair
• 5 - Allen screws
• 1 - eye-hook and bolt pair

Step 1: Handle

Component List:

Figure 2: Snowblower handle.

• 3 - 13mm nut - bolt pair
• 1 - eye-hook and bolt pair
• 2 - washer-bolt-nut pair
• 1 - upper handle
• 1 - lower handle
• 1 - engage handle

Step 2: Chute

Component List:

Figure 3: View of chute base attached to other components.

• 2 - 13mm bolt-nut pair
• 4 - washers( 2 per bolt-nut connection)
• 6 - 11mm bolt-nut pair
• 1 - chute adjustment lever
• 1 - chute collar
• 1 - chute shaft

Step 3: Gas Cap

Component List:

Figure 4: Gas Tank Cap.

• gas cap

Step 4: Casings

Component List:

Figure 5: Front Plastic Section separated from metal casing.

• 2 - Screw-washer-bolt pair
• 2 - washers
• top red casing

Step 5: Front Plastic Section

Component List:

• 2 - 11mm nut
• 1 - Bottom plastic flap
• 5 - 11mm bolt-nut pairs
• 1- front plastic casing

Step 6: Control Panel

Component List:

Figure 6: Top view of Control Panel.

• 5- 8mm bolt
• 2- 10mm bolt-washer pair
• 1- control panel casing
• 1- control panel cover
• 1- key
• 9- 8mm nuts
• 3- flat head screw-nut pairs
• 1- philips head screw
• 1- choke hook

Step 7: Auger

Component List:

• 4-11 mm bolts
• Auger Axle Cap
• 2-13 mm bolts
• 2-13 mm nuts
• 9-10 mm bolts
• 1-10 mm washer
• 9-10 mm nuts
• 10-10 mm screws
• Left Black Side Casing1
• 11-mm washer
• Auger Blade
• 1-14 mm bolt
• Cylindrical Ball Bearing
• Bearing Plate
• Auger Axle

Step 8: Gear Chamber

Component List:

Figure 7: Side Panel containing Pulley-Belt Sub-system.

• 2 - 10 mm bolt and nut pair
• 1 - Bearing and washer
• 1 - Curved Bracket
• 4 - 13mm bolt and nut pair
• 1 - Rubber pulley belt
• 1 - Engage Spring
• 2 - 14mm nut-bolt-washer pair
• 1 - 11mm bolt and nut pair
• 1- guidance cylinder
• 1-gear chamber casing

Step 9: Chute Base Removal:

Component List:

Figure 8: Chute Base attached to curved Auger housing.

• 1 - 10 mm bolt-nut-washer
• 4 - 13 mm bolt-washer pairs
• 1 - Engine shaft
• 1 - 11 mm nut-bolt pair
• 1 - chute base

Step 10: Side Panel

Component List:

Figure 9: Side Panel shown on right next to gas tank.

• 1 - 14 mm nut-bolt pair
• 1 - side panel
• 1 - 9 mm square screw
• 1 - axle clamp
• 1 - spring

Step 11: Gas Tank

Component List:

Figure 10: Gas Tank (yellow) removed from combustion engine housing.

• 2 - nut-bolt washer pairs
• 1 - gas tank

Step 12: Engine Removal

Figure 11: Removal of Muffler from engine.

Component List:

• 2 - 11 mm bolt-washer pairs
• 2 - 11 mm nut-washer pairs
• 2 - Phillips head screws
• 1 - Fuel valve (two be dissected further)
• 2 - 11 mm bolt-nut pairs
• 1 - 10 mm nut
• 1 - washer

Step 13: Engine Isolation

Component List:

Figure 12: Front view of the engine alone with no outside attachments.

• 2 - 13 mm bolt-washer pairs
• 1 - Exhaust box
• 1 - Exhaust ringlet
• 2 - washers
• 2 - 10 mm bolts
• 1 - Electric motor
• 1 - Battery box

Step 14: Electric Motor

Component List:

Figure 13: Electric motor attached to outer engine case.

• 2 - Phillips head screw-nut pairs
• 1 - Electric motor casing
• 1 - Electric motor

Step 15: Engine Housing

Component List:

Figure 14: Removal of top engine cap.

• 2 - Phillips head screw-washer pairs
• 1 - Oil pipe connector
• 6 - 10 mm bolts
• 1 - Crankshaft housing half
• 2 - 10 mm screws
• 1 - Combustion chamber cap
• 1 - 8 mm screw
• 1 - Plastic clamp

Step 16: crankshaft

Component List:

Figure 15: Removal of the roller bearings from crankshaft.

• 2 - Allen screws
• 1 - bracket member
• 1 - Roller bearing
• 32 - rollers
• 1 - Connector Pin
• 3 - piston rings
• 1 -10 mm nut
• 1 - Pull-start connection cup
• 1 - o-ring
• 2 - ball bearing rings
• 1 - crankshaft

Step 17: Engine Shaft Covering

Component List:

Figure 16: Front view of engine shaft covering.

• 4 - 8 mm nut-bolt pairs
• 1 - engine shaft covering
• 1 - Pull-start compartment
• 3 - small screws
• 1 - engine shaft covering screw

Step 18: Fuel Valve

Component List:

• 1 - hook
• 1 - spring
• 1 - bracket
• 1 - black spacer
• 6 - Phillips head screws
• 1 - Bracket with attached spacer
• 1 - Fuel valve covering