SLDASM

From GICLWiki
(Difference between revisions)
Jump to: navigation, search
(New page: Category:Engineering format '''Title(s):''' Title:: - Names(s) that refer to the engineering format. '''Version ID:''' Version ID:: - Identification or version number of the e...)
 
 
(3 intermediate revisions by one user not shown)
Line 1: Line 1:
 
[[Category:Engineering format]]
 
[[Category:Engineering format]]
−
'''Title(s):''' [[Title::]] - Names(s) that refer to the engineering format.
+
'''Title(s):''' [[Title::SolidWorks Assembly Format]]
  
−
'''Version ID:''' [[Version ID::]] - Identification or version number of the engineering format.
+
'''Version ID:''' [[Version ID::SolidWorks 2009]]
  
−
'''Date released:''' [[Version Date released::]] - Date that the version was released.
+
'''Date released:''' [[Version Date released::2008-09-17]]
  
−
'''Date:''' [[Format Date::]] - Date the format was created (YYYY-MM-DD)
+
'''Date:''' [[Format Date::1995]]
  
−
'''Creator(s):''' [[Creator::Entity Template]] - The creator or original author of the engineering format.
+
'''Creator(s):''' [[Creator::SolidWorks Corporation]]
  
−
'''Contributor(s):''' [[Contributor::]] - The current maintainers of the engineering format.
+
'''Contributor(s):''' [[Contributor::SolidWorks Corporation]]
  
−
'''Relationships:''' - Relationships that the engineering format has with organizations, other formats, etc.
+
'''Relationships:''' - The SolidWorks Assembly format was developed by [[SolidWorks Corporation]] in 1995. [[SolidWorks Corporation]] was acquired by [[Dassault Systèmes]] in 1997.
  
−
* '''Previous Version(s):''' [[Previous Version::]] - Any engineering format that is a previous version format of this one.
+
* '''Previous Version(s):'''  
 +
** [[Previous Version::SolidWorks 2008]]
 +
** [[Previous Version::SolidWorks 2007]]
 +
** [[Previous Version::SolidWorks 2006]]
 +
** [[Previous Version::SolidWorks 2005]]
 +
** [[Previous Version::SolidWorks 2004]]
 +
** [[Previous Version::SolidWorks 2003]]
 +
** [[Previous Version::SolidWorks 2001 Plus]]
 +
** [[Previous Version::SolidWorks 2001]]
 +
** [[Previous Version::SolidWorks 2000]]
 +
** [[Previous Version::SolidWorks 99]]
 +
** [[Previous Version::SolidWorks 98 Plus]]
 +
** [[Previous Version::SolidWorks 98]]
 +
** [[Previous Version::SolidWorks 97 Plus]]
 +
** [[Previous Version::SolidWorks 97]]
 +
** [[Previous Version::SolidWorks 96]]
 +
** [[Previous Version::SolidWorks 95]]
  
−
* '''Contains:''' [[Contains::]] - Any engineering format that is contained by this format.
+
* '''Contains:''' [[Contains::SLDPRT]]
  
−
* '''Syntax Format(s):''' [[Syntax Format::]] - Any syntax formats that the engineering format may use.
+
* '''Syntax Format(s):''' [[Syntax Format::None]]
  
−
* '''Family Format(s):''' [[Family Format::]] - Any family formats to which the engineering format may belong.
+
* '''Family Format(s):''' [[Family Format::None]]
  
−
'''Description:''' [[Description::]] - Main description of the format, which can give extra information not categorized.
+
'''Description:''' [[Description::SolidWorks Assembly format files are files produced by SolidWorks software. SolidWorks Assembly format files contain a number of SolidWorks Part format files that describe an object for CAD and CAM purposes.]]
  
−
'''History:''' [[History::]] - Historical description depicting major events surrounding development, creation, and maintenance of this format.
+
'''History:''' See [http://www.solidworks.com/sw/656_ENU_HTML.htm SolidWorks Company History] for an overview of the format and company history.
  
−
'''Example(s):''' [[Example::Example Template]] - Information and example models of the engineering format.
+
'''Example(s):'''  
 +
*  Sample file: [[Media:SLD.tar]]
 +
* Sample Screenshot: [[Media:ASMImage.PNG]]
  
−
'''Identifier:''' [[Identifier::]] - A URL or other identifier that refers to the engineering format.
+
'''Identifier:''' [[Identifier::]]
  
−
'''Documentation:''' [[Documentation::Documentation Template]] - Information in general about the engineering format.
+
'''Documentation:''' [[Documentation::SolidWorks Corporation]]
  
−
'''File Extensions:''' [[File Extension::]] - Extensions of the engineering format, excluding the dot.
+
'''File Extensions:''' [[File Extension::SLDPRT]]
  
−
'''Applications:''' - Applications that the engineering format uses.
+
'''Applications:'''
  
−
* '''Native application(s):''' [[Native Application::Engineering Format Application Template]] - Applications which are primarily designed to specifically run this engineering format.
+
* '''Native application(s):'''  
 +
** [[Native Application::SolidWorks Formats - Solidworks]]
 +
** [[Native Application::SolidWorks Formats - eDrawings Viewer]]
  
−
* '''Interoperable applications:''' [[Interoperable Application::Engineering Format Application Template]] - Applications which can read or write files of this format, but are not native applications for the format.
+
* '''Interoperable applications:''' See [http://www.solidworks.com/sw/products/engineering-software-partners.htm SolidWorks Partner Products] for a list of products that operate with SolidWorks files.
  
−
'''Magic numbers:''' [[Magic Numbers::]] - Unique identifying characters at the beginning of files for this engineering format.
+
'''Magic numbers:''' [[Magic Numbers::Unknown; Proprietary format]]
  
−
'''Format(s):''' [[Format::]] - The MIME file types.
+
'''Format(s):''' [[Format::Unknown]]
  
−
'''Rights:''' [[Rights::]] - The name or type of the license for the engineering format. Examples: BSD-style license, Apache License, Proprietary license
+
'''Rights:''' [[Rights::Proprietary license]]
  
−
'''Sustainability Factors:''' - Facts about the sustainability of this particular engineering format.
+
'''Sustainability Factors:'''
  
−
* '''Standardization:''' [[Standardization::]] - Information regarding standardization attempts with this format.
+
* '''Standardization:''' [[Standardization::]]
  
−
* '''Adoption:''' [[Adoption::]] - Information about how this format has been adopted by other organizations.
+
* '''Adoption:''' [[Adoption::]]
  
−
** '''Licensing and patent claims:''' [[Licensing and patent claims::]] - Any licenses or patent claims that the engineering format makes.
+
** '''Licensing and patent claims:''' [[Licensing and patent claims::Proprietary license]]
  
−
* '''Self-documentation:''' [[Self-documentation::]] - Any self-documentation capabilities of the format.
+
* '''Self-documentation:''' [[Self-documentation::None]]
  
−
* '''External dependencies:''' [[External dependencies::]] - Anything that the format depends on outside of its control to function.
+
* '''External dependencies:''' [[External dependencies::None]]
  
−
* '''Technical protection considerations:''' [[Technical protection considerations::]] - Any considerations that are necessary when it comes to technical protection.
+
* '''Technical protection considerations:''' [[Technical protection considerations::There are export eligibility considerations pertaining to the software used to generate and/or view SolidWorks files.]]
  
−
'''Typical use:''' [[Typical use::]] - Keywords that describe the format's typical use. Examples: CAD and CAM
+
'''Typical use:''' [[Typical use::CAD]] [[Typical use::CAM]]
  
−
'''File classification:''' - Specific properties that pertain to this engineering format.
+
'''File classification:'''
−
* '''Type {Binary, Text}:''' [[File Classification Type::]] - The type of file, choices are binary and text.
+
* '''Type {Binary, Text}:''' [[File Classification Type::Binary]]
−
* '''Raster data:''' - Section describes whether or not the engineering format supports raster data.
+
* '''Raster data:'''
−
** '''Raster data 2D:''' - Can the format support 2D raster data? Example: A format that can contain 2D pixelated data supports 2D raster data.
+
** '''Raster data 2D:'''
−
*** '''Is Supported:''' [[File Classification Raster Data 2D - Is Supported::]] - Is the feature supported in the engineering format?
+
*** '''Is Supported:''' [[File Classification Raster Data 2D - Is Supported::]]
−
*** '''Description:''' [[File Classification Raster Data 2D - Description::]] - This field is used to describe the support or lack of support of the feature.
+
*** '''Description:''' [[File Classification Raster Data 2D - Description::]]
−
** '''Raster data 3D:''' - Can the format support 3D raster data? Example: A format that can contain 2D pixelated data of a 3D model supports 3D raster data.
+
** '''Raster data 3D:'''
−
*** '''Is Supported:''' [[File Classification Raster Data 3D - Is Supported::]] - Is the feature supported in the engineering format?
+
*** '''Is Supported:''' [[File Classification Raster Data 3D - Is Supported::]]
−
*** '''Description:''' [[File Classification Raster Data 3D - Description::]] - This field is used to describe the support or lack of support of the feature.
+
*** '''Description:''' [[File Classification Raster Data 3D - Description::]]
−
* '''Geometric representation:''' - Section describes whether or not the engineering format supports geometric representations.
+
* '''Geometric representation:'''
−
** '''Implicit representation:''' - Section describes whether or not the engineering format supports implicit representations.
+
** '''Implicit representation:'''
−
*** '''Implicit surfaces:''' - Can the format support implicit surfaces? Example: A format that can contain surfaces that are generated with mathematical equations that contain the independent variables x, y, and z, like x^2 + y^2 + z^2 * R^2 = 0, supports implicit surfaces.
+
*** '''Implicit surfaces:'''
−
**** '''Is Supported:''' [[File Classification Implicit Surfaces - Is Supported::]] - Is the feature supported in the engineering format?
+
**** '''Is Supported:''' [[File Classification Implicit Surfaces - Is Supported::]]
−
**** '''Description:''' [[File Classification Implicit Surfaces - Description::]] - This field is used to describe the support or lack of support of the feature.
+
**** '''Description:''' [[File Classification Implicit Surfaces - Description::]]
−
*** '''Implicit curves:''' - Can the format support implicit curves? Example: A format that can contain curves that are generated with mathematical equations that contain the independent variables x, y, and z, supports implicit curves.
+
*** '''Implicit curves:'''
−
**** '''Is Supported:''' [[File Classification Implict Curves - Is Supported::]] - Is the feature supported in the engineering format?
+
**** '''Is Supported:''' [[File Classification Implict Curves - Is Supported::]]
−
**** '''Description:''' [[File Classification Implicit Curves - Description::]] - This field is used to describe the support or lack of support of the feature.
+
**** '''Description:''' [[File Classification Implicit Curves - Description::]]
−
*** '''Point set:''' - Can the format support point sets? Example: A format that supports surfaces and lines that are generated by points that form triangles supports point sets.
+
*** '''Point set:'''
−
**** '''Is Supported:''' [[File Classification Point Set - Is Supported::]] - Is the feature supported in the engineering format?
+
**** '''Is Supported:''' [[File Classification Point Set - Is Supported::]]
−
**** '''Description:''' [[File Classification Point Set - Description::]] - This field is used to describe the support or lack of support of the feature.
+
**** '''Description:''' [[File Classification Point Set - Description::]]
−
** '''Mesh:''' - Section describes whether or not the engineering format supports mesh.
+
** '''Mesh:'''
−
*** '''Manifold surface meshes:''' - Can the format support manifold surface meshes? Example: A format that supports surfaces that are mathematical spaces in which every point has a neighborhood which resembles Euclidean space
+
*** '''Manifold surface meshes:'''
−
**** '''Is Supported:''' [[File Classification Mainfold Surface Meshes - Is Supported::]] - Is the feature supported in the engineering format?
+
**** '''Is Supported:''' [[File Classification Mainfold Surface Meshes - Is Supported::]]
−
**** '''Description:''' [[File Classification Manifold Surface Meshes - Description::]] - This field is used to describe the support or lack of support of the feature.
+
**** '''Description:''' [[File Classification Manifold Surface Meshes - Description::]]
−
*** '''Manifold volume meshes:''' - Can the format support manifold volume meshes? Example: A format that supports volumes that are mathematical spaces in which every point has a neighborhood which resembles Euclidean space
+
*** '''Manifold volume meshes:'''
−
**** '''Is Supported:''' [[File Classification Manifold Volume Meshes - Is Supported::]] - Is the feature supported in the engineering format?
+
**** '''Is Supported:''' [[File Classification Manifold Volume Meshes - Is Supported::]]
−
**** '''Description:''' [[File Classification Manifold Volume Meshes - Description::]] - This field is used to describe the support or lack of support of the feature.
+
**** '''Description:''' [[File Classification Manifold Volume Meshes - Description::]]
−
*** '''Non-manifold meshes:''' - Can the format support non-manifold meshes? Example: A format that supports meshes that are not manifolds
+
*** '''Non-manifold meshes:'''
−
**** '''Is Supported:''' [[File Classification Non-manifold Meshes - Is Supported::]] - Is the feature supported in the engineering format?
+
**** '''Is Supported:''' [[File Classification Non-manifold Meshes - Is Supported::]]
−
**** '''Description:''' [[File Classification Non-manifold Meshes - Description::]] - This field is used to describe the support or lack of support of the feature.
+
**** '''Description:''' [[File Classification Non-manifold Meshes - Description::]]
−
** '''Parametric representation:''' - Section describes whether or not the engineering format supports parametric representations.
+
** '''Parametric representation:'''
−
*** '''Parametric surfaces:''' - Can the format support parametric surfaces? Example: A format that can contain surfaces that are generated with parametric equations supports parametric surfaces.
+
*** '''Parametric surfaces:'''
−
**** '''Is Supported:''' [[File Classification Parametric Surfaces - Is Supported::]] - Is the feature supported in the engineering format?
+
**** '''Is Supported:''' [[File Classification Parametric Surfaces - Is Supported::Yes]]
−
**** '''Description:''' [[File Classification Parametric Surfaces - Description::]] - This field is used to describe the support or lack of support of the feature.
+
**** '''Description:''' [[File Classification Parametric Surfaces - Description::Geometric elements are parametric.]]
−
*** '''Parametric curves:''' - Can the format support parametric curves? Example: A format that can contain curves that are generated with parametric equations supports parametric curves.
+
*** '''Parametric curves:'''
−
**** '''Is Supported:''' [[File Classification Parametric Curves - Is Supported::]] - Is the feature supported in the engineering format?
+
**** '''Is Supported:''' [[File Classification Parametric Curves - Is Supported::Yes]]
−
**** '''Description:''' [[File Classification Parametric Curves - Description::]] - This field is used to describe the support or lack of support of the feature.
+
**** '''Description:''' [[File Classification Parametric Curves - Description::Geometric elements are parametric.]]
−
** '''Contour sets:''' - Can the format support contour sets?
+
** '''Contour sets:'''
−
*** '''Is Supported:''' [[File Classification Contour Sets - Is Supported::]] - Is the feature supported in the engineering format?
+
*** '''Is Supported:''' [[File Classification Contour Sets - Is Supported::]]
−
*** '''Description:''' [[File Classification Contour Sets - Description::]] - This field is used to describe the support or lack of support of the feature.
+
*** '''Description:''' [[File Classification Contour Sets - Description::]]
−
** '''NURBS:''' - Can the format support Non Uniform Rational Basis Splines? Examples: The engineering formats IGES, STEP, ACIS, and PHIGS
+
** '''NURBS:'''
−
*** '''Is Supported:''' [[File Classification NURBS - Is Supported::]] - Is the feature supported in the engineering format?
+
*** '''Is Supported:''' [[File Classification NURBS - Is Supported::Yes]]
−
*** '''Description:''' [[File Classification NURBS - Description::]] - This field is used to describe the support or lack of support of the feature.
+
*** '''Description:''' [[File Classification NURBS - Description::NURBs are supported.]]
−
* '''Multi-resolution models:''' - Can the format support models with multiple resolutions? Examples: A format that supports a highly detailed and lowly detailed model simultaneously supports multi-resolution models.
+
* '''Multi-resolution models:'''
−
** '''Is Supported:''' [[File Classification Multi-resolution Models - Is Supported::]] - Is the feature supported in the engineering format?
+
** '''Is Supported:''' [[File Classification Multi-resolution Models - Is Supported::]]
−
** '''Description:''' [[File Classification Multi-resolution Models - Description::]] - This field is used to describe the support or lack of support of the feature.
+
** '''Description:''' [[File Classification Multi-resolution Models - Description::]]
−
* '''Dynamics:''' - Section describes whether or not the engineering format supports dynamics.
+
* '''Dynamics:'''
−
** '''Kinematics:''' - Can the format support kinematics? Example: Does the format allow model parts to rotate?
+
** '''Kinematics:'''
−
*** '''Is Supported:''' [[File Classification Kinematics - Is Supported::]] - Is the feature supported in the engineering format?
+
*** '''Is Supported:''' [[File Classification Kinematics - Is Supported::Yes]]
−
*** '''Description:''' [[File Classification Kinematics - Description::]] - This field is used to describe the support or lack of support of the feature.
+
*** '''Description:''' [[File Classification Kinematics - Description::Kinematics are supported]]
−
** '''Assembly:''' - Can the format support assembly? Example: Does the format allow the assembly instructions to be explicitly specified with a model?
+
** '''Assembly:'''
−
*** '''Is Supported:''' [[File Classification Assembly - Is Supported::]] - Is the feature supported in the engineering format?
+
*** '''Is Supported:''' [[File Classification Assembly - Is Supported::Yes]]
−
*** '''Description:''' [[File Classification Assembly - Description::]] - This field is used to describe the support or lack of support of the feature.
+
*** '''Description:''' [[File Classification Assembly - Description::SolidWorks Assembly format files contain an assembly of SolidWorks Part format files.]]
−
** '''Force(s):''' - Can the format support forces? Example: Does the format support acceleration forces?
+
** '''Force(s):'''
−
*** '''Is Supported:''' [[File Classification Force - Is Supported::]] - Is the feature supported in the engineering format?
+
*** '''Is Supported:''' [[File Classification Force - Is Supported::Yes]]
−
*** '''Description:''' [[File Classification Force - Description::]] - This field is used to describe the support or lack of support of the feature.
+
*** '''Description:''' [[File Classification Force - Description::Forces are supported]]
−
* '''Boundary representation''' - Can the format support models with boundary representations?
+
* '''Boundary representation'''
−
** '''Manifold surface boundary representations:''' - Can the format support manifold surface boundary representations? Example: The engineering format STEP
+
** '''Manifold surface boundary representations:'''
−
*** '''Is Supported:''' [[File Classification Manifold Surface Boundary Representation - Is Supported::]] - Is the feature supported in the engineering format?
+
*** '''Is Supported:''' [[File Classification Manifold Surface Boundary Representation - Is Supported::]]
−
*** '''Description:''' [[File Classification Manifold Surface Boundary Representation - Description::]] - This field is used to describe the support or lack of support of the feature.
+
*** '''Description:''' [[File Classification Manifold Surface Boundary Representation - Description::]]
−
** '''Manifold volume boundary representations:''' - Can the format support manifold volume boundary representations? Example: The engineering format STEP
+
** '''Manifold volume boundary representations:'''
−
*** '''Is Supported:''' [[File Classification Manifold Volume Boundary Representation - Is Supported::]] - Is the feature supported in the engineering format?
+
*** '''Is Supported:''' [[File Classification Manifold Volume Boundary Representation - Is Supported::]]
−
*** '''Description:''' [[File Classification Manifold Volume Boundary Representation - Description::]] - This field is used to describe the support or lack of support of the feature.
+
*** '''Description:''' [[File Classification Manifold Volume Boundary Representation - Description::]]
−
** '''Non-manifold boundary representations:''' - Can the format support non-manifold boundary representations? Example: The engineering format STEP
+
** '''Non-manifold boundary representations:'''
−
*** '''Is Supported:''' [[File Classification Non-manifold Boundary Representation - Is Supported::]] - Is the feature supported in the engineering format?
+
*** '''Is Supported:''' [[File Classification Non-manifold Boundary Representation - Is Supported::]]
−
*** '''Description:''' [[File Classification Non-manifold Boundary Representation - Description::]] - This field is used to describe the support or lack of support of the feature.
+
*** '''Description:''' [[File Classification Non-manifold Boundary Representation - Description::]]
−
* '''Material transparency:''' - Can the format support transparency? Example: Does the format allow models to have a clear window in a car?
+
* '''Material transparency:'''
−
** '''Is Supported:''' [[File Classification Material Transparency - Is Supported::]] - Is the feature supported in the engineering format?
+
** '''Is Supported:''' [[File Classification Material Transparency - Is Supported::Yes]]
−
** '''Description:''' [[File Classification Material Transparency - Description::]] - This field is used to describe the support or lack of support of the feature.
+
** '''Description:''' [[File Classification Material Transparency - Description::Transparency is supported.]]
  
−
'''References:''' [[References::]] - A list of references regarding any aspects of this engineering format; any reading material supplemental to this page.
+
'''References:'''  
 +
* [http://www.solidworks.com/sw/656_ENU_HTML.htm SolidWorks Company History]
 +
* [http://www.solidworks.com/sw/eula_en.htm SolidWorks License Agreement]
 +
* [http://www.solidsmack.com/solidworks-2009-sp00-ready-for-ya-to-snatch/2008-09-17/ SolidWorks 2009 Release]
 +
* [http://www.solidworks.com/sw/products/engineering-software-partners.htm SolidWorks Partner Products]
 +
* [http://en.wikipedia.org/wiki/SolidWorks SolidWorks Application Overview]

Latest revision as of 17:54, 13 May 2009

Title(s): SolidWorks Assembly Format

Version ID: SolidWorks 2009

Date released: 2008-09-17

Date: 1995

Creator(s): SolidWorks Corporation

Contributor(s): SolidWorks Corporation

Relationships: - The SolidWorks Assembly format was developed by SolidWorks Corporation in 1995. SolidWorks Corporation was acquired by Dassault Systèmes in 1997.

  • Syntax Format(s): None
  • Family Format(s): None

Description: SolidWorks Assembly format files are files produced by SolidWorks software. SolidWorks Assembly format files contain a number of SolidWorks Part format files that describe an object for CAD and CAM purposes.

History: See SolidWorks Company History for an overview of the format and company history.

Example(s):

Identifier:

Documentation: SolidWorks Corporation

File Extensions: SLDPRT

Applications:

Magic numbers: Unknown; Proprietary format

Format(s): Unknown

Rights: Proprietary license

Sustainability Factors:

  • Standardization:
  • Adoption:
  • Self-documentation: None
  • External dependencies: None

Typical use: CAD CAM

File classification:

  • Type {Binary, Text}: Binary
  • Raster data:
    • Raster data 2D:
      • Is Supported:
      • Description:
    • Raster data 3D:
      • Is Supported:
      • Description:
  • Geometric representation:
    • Implicit representation:
      • Implicit surfaces:
        • Is Supported:
        • Description:
      • Implicit curves:
        • Is Supported:
        • Description:
      • Point set:
        • Is Supported:
        • Description:
    • Mesh:
      • Manifold surface meshes:
        • Is Supported:
        • Description:
      • Manifold volume meshes:
        • Is Supported:
        • Description:
      • Non-manifold meshes:
        • Is Supported:
        • Description:
    • Parametric representation:
    • Contour sets:
      • Is Supported:
      • Description:
    • NURBS:
  • Multi-resolution models:
    • Is Supported:
    • Description:
  • Dynamics:
  • Boundary representation
    • Manifold surface boundary representations:
      • Is Supported:
      • Description:
    • Manifold volume boundary representations:
      • Is Supported:
      • Description:
    • Non-manifold boundary representations:
      • Is Supported:
      • Description:
  • Material transparency:

References:

Retrieved from "http://gicl.cs.drexel.edu/wiki-data/index.php?title=SLDASM&oldid=31718"
Personal tools