Rich Primerano's Course Project

From GICLWiki

Revision as of 18:52, 3 October 2006 by Evan (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The Project

I began this project several years ago. The goal was to design a robot that behaved similar to a biological snake. The intent being that the robot would be a good platform for testing various control, path planning and object avoidance algorithms. Currently, I have completed the construction of the physical device and am in the process of building motor drive electronics. The first version of the snake will contain joint torque sensors and proximity sensors. Without too much more effort, I could add tactile sensors on the feet which would allow the snake to perform ground hugging and stability monitoring.

One of the first things I'll work on for this class is developing a physics based model of the robotic snake using ADAMS. The purpose of this is so that I may test several control algorithms, written in MATLAB, and tune their performance using the virtual device rather than a physical robot.

A solid model of the robot is already built in Pro/Engineer and a controller is being written in MATLAB. The initial controller will be a simple PID with each axis decoupled from the others. Although this is not the best approach, It should be adequate in the beginning while I work out some bugs. Later, this will likely be replaced with a state feedback controller. Initially, the controller will drive a simulated version of the snake build in a (still undetermined) physics based simulator.

Week 1

This week, I have familiarizes myself with MSC/ADAMS, a program used for developing physics based models. This model could be integrated with a control algorithm so that the controller could be tuned without needing the physical robot. I have begun going through the tutorial at the link below. Later this week, I'll try to import some of the snake segments and build an assembly from them.