ROS (Robot Operating System)
(→Control with Keyboard) |
|||
| Line 22: | Line 22: | ||
After starting the p2os driver and everything, you can control the robot via keyboard with: | After starting the p2os driver and everything, you can control the robot via keyboard with: | ||
<pre>$ roslaunch p2os_launch teleop_keyboard.launch</pre> | <pre>$ roslaunch p2os_launch teleop_keyboard.launch</pre> | ||
| − | + | To get p2os_teleop working: | |
| + | http://answers.ros.org/question/11417/datatypemd5sum-error-with-p2os_teleop | ||
== rviz == | == rviz == | ||
To get rviz to work put this in your .bashrc: | To get rviz to work put this in your .bashrc: | ||
<pre>export OGRE_RTT_MODE=FBO</pre> | <pre>export OGRE_RTT_MODE=FBO</pre> | ||
Revision as of 18:49, 9 May 2012
We're using ROS to do our work so we can easily translate it to the robot. http://www.ros.org/wiki/
Contents |
p2os
The ROS stack for hooking up to the pioneer. Here is an example of our robot using ROS and the navigation system: http://youtu.be/f3Iu2t0d3xo
Installing
http://www.ros.org/wiki/p2os/Tutorials/Getting%20Started%20with%20p2os
After following the directions above, we have to set the p2os/port to our cable's device name:
$ rosparam set p2os/port /dev/ttyUSB0
Running
Run on the base:
$ rosrun p2os_driver p2os
Run on the computer controlling the base:
$ rosrun p2os_dashboard p2os_dashboard
If you get an error like:
P2OS connection opening serial port /dev/ttyS0...
This command should fix it:
$ rosparam set p2os/port /dev/ttyUSB0
Control with Keyboard
After starting the p2os driver and everything, you can control the robot via keyboard with:
$ roslaunch p2os_launch teleop_keyboard.launch
To get p2os_teleop working: http://answers.ros.org/question/11417/datatypemd5sum-error-with-p2os_teleop
rviz
To get rviz to work put this in your .bashrc:
export OGRE_RTT_MODE=FBO
