Mr. Coffee TFX20 Coffee Maker
(→'''Parts''') |
(→'''Parts''') |
||
| Line 13: | Line 13: | ||
== '''Parts''' == | == '''Parts''' == | ||
| + | #Bottom Casing | ||
| + | #Metal Cover | ||
| + | #Heating Element | ||
| + | #Orange Tube | ||
| + | #Non-Stick Warming Plate | ||
#Control Panel | #Control Panel | ||
| − | # | + | #Hot Plate Holder |
| − | # | + | #Circuit Board |
| − | # | + | #Battery Compartment |
| + | #Black Tube | ||
| + | #Water Sprout | ||
#Removable Filter Basket | #Removable Filter Basket | ||
| − | # | + | #Filter |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
#Filter Spring | #Filter Spring | ||
| − | # | + | #Water Resorvoir |
| − | # | + | #Casing |
| + | #Screw | ||
| + | #Decantur | ||
| + | #Ergonomically Designed Handle | ||
| + | |||
| − | The table belows lists the Bill of Materials for the | + | The table belows lists the Bill of Materials for the coffee maker: |
{| border="1" align="center" | {| border="1" align="center" | ||
| Line 34: | Line 41: | ||
|- | |- | ||
! 1 | ! 1 | ||
| − | | align="center"|Bottom | + | | align="center"|Bottom Casing |
| align="center"|1 | | align="center"|1 | ||
| align="center"|ABS Plastic | | align="center"|ABS Plastic | ||
| Line 43: | Line 50: | ||
|align="center"|Metal Cover | |align="center"|Metal Cover | ||
| align="center"|1 | | align="center"|1 | ||
| − | |align="center"| | + | | align="center"|Metal |
| align="center"|N/A | | align="center"|N/A | ||
| [[Image:bottomcasing3.jpg|center|thumb|50px]] | | [[Image:bottomcasing3.jpg|center|thumb|50px]] | ||
Revision as of 13:17, 31 July 2006
Description
This product is manufactured by Mr. Coffee and is one of many programmable coffee maker's that can brew up to twelve cups of coffee. Its programming capabilities allow for pause and serve options as well as setting the timer up to 24 hours in advance before brewing.
How It Works
When cold water is poured into the bucket, it flows from the bucket through the hole in the bottom of the bucket and into the orange tube. The cool water then flows through the one-way valve into the aluminum tube in the heating element, and then partially up through the black tube. This all happens naturally because of gravity.
When the switch is turned on, the heating element starts heating the aluminum tube, and eventually the water in the tube boils.
When the water boils, the bubbles rise up in the black tube and carries the water up the tube. The water flows out the end of the black tube to drip into the filter basket. The hot water and coffee grounds inside the filter basket brew and filter out through the bottom of the basket into the decantur to make fresh ground coffee.
Parts
- Bottom Casing
- Metal Cover
- Heating Element
- Orange Tube
- Non-Stick Warming Plate
- Control Panel
- Hot Plate Holder
- Circuit Board
- Battery Compartment
- Black Tube
- Water Sprout
- Removable Filter Basket
- Filter
- Filter Spring
- Water Resorvoir
- Casing
- Screw
- Decantur
- Ergonomically Designed Handle
The table belows lists the Bill of Materials for the coffee maker:
| Part # | Part Name | # Req'd | Mat'l | Manufacturing Process | Image |
|---|---|---|---|---|---|
| 1 | Bottom Casing | 1 | ABS Plastic | N/A |  |
| 2 | Metal Cover | 1 | Metal | N/A | |
| 3 | Heating Element | 1 | Aluminum | N/A | Need to upload |
| 4 | Orange Tube | 2 | ABS Plastic | N/A | Need to upload |
| 5 | Hot Plate | 1 | ABS Plastic | N/A |  |
| 6 | Control Panel | 1 | ABS Plastic | N/A |  |
| 7 | Hot Plate Holder | 1 | Varied | N/A |  |
| 8 | Circuit Board | 1 | ABS Plastic | N/A | Need to upload |
| 9 | Battery Compartment | 1 | ABS Plastic | N/A | Need to upload |
| 10 | Black Tube | 1 | ABS Plastic | N/A | Need to upload |
| 11 | Water Sprout | 1 | ABS Plastic and Rubber | N/A |  |
| 12 | Filter Basket | 1 | ABS Plastic | N/A |  |
| 13 | Filter | 1 | ABS Plastic | N/A |  |
| 14 | Filter Spring | 1 | ABS Plastic | N/A |  |
| 15 | Water Resorvoir | 1 | ABS Plastic | N/A |  |
| 16 | Casing | 1 | ABS Plastic | Injection Molding |  |
| 17 | Screws | 18 | Metal | N/A | Need to upload |
