Group 5 - Kawasaki Compressor 2
(→Executive Summary) |
(→Executive Summary) |
||
| Line 7: | Line 7: | ||
== <b>Executive Summary</b> == | == <b>Executive Summary</b> == | ||
| − | ======== | + | ====X==== |
| − | ======== | + | ====X==== |
| − | ======== | + | ====X==== |
| − | ======== | + | ====X==== |
| − | ======== | + | ====X==== |
| − | ======== | + | ====X==== |
<br> | <br> | ||
Revision as of 01:49, 20 December 2010
Contents |
Group Members
1. Donald Pangrazio
2. Donovan Southwell
3. Maxwell Urban
4. Sourobh Ghosh
5. Tara Harten
Executive Summary
X
X
X
X
X
X
Introduction
Our group has been assigned one of the Kawasaki Air Compressors. Our main goals are to understand how this product works as a whole and how each individual component works. We will do this by disassembling the entire product and then reassembling after all of our assessments. Our plans, time management, and individual roles are explained in further detail on our Gate 1 page. To see our progress and conclusions refer to each individual gate page as time goes on.
Gate 1: Project Planning
Gate 1 is the planning stage of our project. The planning stage includes our:
-Work Proposal
-Management Proposal
-Preparation and Initial Assessment
Our Work Proposal has an overview of how our group plans to disassemble the compressor, what tools we will need, an estimate of how long it will take, and challenges we might face. Our Management Proposal has our list of our member's jobs and capabilities. The Preparation and Initial Assessment includes all of our profiles of our product without any dissection of the product itself. Click the link below for our Gate 1.
"Gate 1"
Gate 2: Product Dissection
Gate 2 is about our product dissection and preliminary project review.
-Our product dissection is outlined by a detailed step-by-step process which included what tools we used, how difficult the step was, and if faced any challenges during the dissection. It also includes all of the subsystems of the compressor, how they are connected, why they are connected, and the arrangement of the connections.
-Our preliminary project review included our cause for corrective action, which explains how our plan for dissection worked out and how it did not. It also outlines how our group would handle hypothetical issues together.
Click for "Gate 2"
Gate 3: Product Analysis
Gate 3 is about our product evaluation and our coordination review.
-Our product evaluation contains our component summary, our product analysis, our solid modeled assembly, engineering analysis, and our subsystem design revisions. The component summary documents all of the components with their functions, materials used to produce, manufacturing processes, along with any other important details. The product analysis covers five component's individual function, form, manufacturing method, and complexity in detail. The solid modeled assembly is a sequence of components being assembled. The engineering analysis focuses on an individual component and how the engineering analysis affects its design and testing. The three design revisions of subsystems explains an additional feature revision or an elimination feature revision.
-Our coordination review includes our cause for corrective action. For this gate we evaluated how we dealt with group problems as well as hypothetical issues again.
Click for "Gate 3"
Gate 4: Product Explanation
Gate 4 is about our product explanation and critical project review.
-Our product explanation includes our product reassembly and system design revisions. The product reassembly describes our progressive process of reassembling our air compressor. Each step was detailed with which tool was used, how difficult it was, and if there were any challenges. The three design revisions explain an additional feature revision or an elimination feature revision on the system level.
-Our critical project review is our cause for corrective action. This section resolves all of our group issues throughout the semester and how we solved them and how we are going to solve our unresolved problems at the present.
Click for "Gate 4"
