Group 23 - Daiwa Baitcast Reel (Right Hand Retrieve)
| Line 26: | Line 26: | ||
| − | == | + | ==Gate 2== |
This gate dealt with the first practical work involved with the project, that is, the taking apart of the product along with its documentation. The subsystems were recognized and pictorial representation was used to help understand the step-by-step disassembly process. Also, the initial planning of the project was revised. | This gate dealt with the first practical work involved with the project, that is, the taking apart of the product along with its documentation. The subsystems were recognized and pictorial representation was used to help understand the step-by-step disassembly process. Also, the initial planning of the project was revised. | ||
Revision as of 14:12, 11 November 2012
Contents |
Members
Md. Fahad Hossain
Paul Tabellion
Connor McCafferty
Mike Persic
Kevin Dailey
Project Overview
Over the course of this semester, team 23 disassembled and re-assembled a Daiwa Baitcast Reel (Right Hand Retrieve). The main objective of this project was to carefully, analyze the reel, which includes the documentation of the internal parts so that any individual, regardless of prior experience, may also take it apart with ease. We also looked into its internal workings and all the mechanisms that are involved when the product is being used out in the field. The whole project was thus divided into Gates, each dealing with a level of the project. Lastly, after each assessment of our Gates, we attempted amending the Gates to better suite the needs of the instructors.
Gate 1
This gate mainly dealt with the overall planning of the project. Furthermore, the products initial assessment was made without any attempt to disassemble it. This gate includes:
- Work Proposal
- Management Proposal
- Product Archeology
Gate 1: Work and Management Proposal, Product Archeology
Gate 2
This gate dealt with the first practical work involved with the project, that is, the taking apart of the product along with its documentation. The subsystems were recognized and pictorial representation was used to help understand the step-by-step disassembly process. Also, the initial planning of the project was revised. This gate included:
- Revision of Initial Planning
- Product Dissection
