Group 13 - Honda Engine 1

Revision as of 15:06, 16 December 2010

Introduction:

For this project, Group 13 will be reverse engineering an internal combustion engine from a Honda CBR F2 by dis-assembly followed by reassembly. This process will be consisting of documentation of the systems, subsystems and the individual components within the four-stroke motor.

Team 13 Contact Information:

E-mail: MAE277Team13@gmail.com

Group Members:

• Timothy Brady email: tjbrady@buffalo.edu
• Jonathan Berlad email: jeberlad@buffalo.edu
• Christopher Ayers email: chayers@buffalo.edu
• Ryan Nelson email: ryannels@buffalo.edu
• Brandon Phillips email: brandonp@buffalo.edu

Project Sections:

Project Management:

• Gate 1: Product Management

- Contains a brief look at the work required, procedures and the projected schedule along with information and background on Group 13.

• Gate 2: Preliminary Project Review

- This section contains a review of the project, examining the successes and shortcomings thus far.

• Gate 3: Coordination Review

- Displays an outline of the internal problems the group has faced as well ongoing issues within.

• Gate 4: Cause for Corrective Action

- An outline of how the internal problems the group were solved during the last stage of the project.

Product Archaeology:

• Gate 1: Product Archaeology

- Shows an overlook of the product, including profiles of its different aspects.

• Gate 2: Product Dissection

- Contains a detailed log of the process and dissection pertaining to the Honda Engine, including a step by step procedure of the disassembling.

• Gate 3: Product Evaluation

- Contains a list of all the components of the Honda Engine, along with detailed information concerning them.

• Gate 4: Product Explanation

- Contains a detailed log of the re-assembly pertaining to the Honda Engine.