Group 12 - Fuji Waterproof Camera
Contents |
Executive Summary
Introduction
The Fuji Waterproof Disposable Camera is a product designed to be user friendly, simple and easy to use under harsh conditions. The camera works just like any other conventional film camera whereby light enters thru the main lens and the image taken gets exposed on a film. The only difference between a normal camera and the disposable camera is that the latter has no power source and all of the parts work mechanically. The other distinct difference is that it also has waterproofing capabilities up to a specfied depth. The disposable camera is design for a single use with the film providing 27 exposures per use. The design of the whole system makes the camera robust and tough for outdoor activities.
Group Members
- Chung, Jun Yong
- Deyo, Raymond (Wiki Page Master & Group Leader)
- Gomez, Adrian (Wiki Page Master)
- Heath, Vatsana (Disassembly,CAD Work)
- Lewczyk, Tomasz (Assembly)
Before Disassembly
Parts
The table belows lists the Bill of Materials for the disposable camera:
| Part # | Part Name | # Req'd | Mat'l | Manufacturing Process | Image |
|---|---|---|---|---|---|
| 1 | Paper Case | 1 | Paper |  | |
| 2 | Plastic Packing | 1 | Plastic |  | |
| 3 | Waterproof Strap | 1 | Plastic |  | |
| 4 | Front Waterproof Cover | 1 | Plastic | Injection Molding |  |
| 5 | Back Waterproof Cover | 1 | Plastic | Injection Molding |  |
| 6 | Waterproof Seal | 1 | Rubber |  | |
| 7 | Shutter Release Arm | 1 | Plastic | Injection Molding |  |
| 8 | Film Spindle | 1 | ABS Plastic | Injection Molding |  |
| 9 | Shutter Release Clip | 1 | Plastic | Injection Molding | [[Image:<>.JPG |center|thumb|50px]] |
| 10 | Shutter Release Seal | 1 | Rubber | ||
| 11 | Shutter Release Spring | 1 | Steel |  | |
| 12 | Outer Film Spindle | 1 | Plastic | Injection Molding |  |
| 13 | Outer Film Spindle Seal | 1 | Rubber |  | |
| 14 | Front Chasis | 1 | Plastic | Injection Molding |  |
| 15 | Camera Lens | 1 | Plastic | Injection Molding |  |
| 16 | Front Viewfinder | 1 | Plastic | Injection Molding |  |
| 17 | Back Viewfinder | 1 | Plastic | Injection Molding |  |
| 18 | Magnifier | 1 | Plastic | Injection Molding |  |
| 19 | Frame Counter | 1 | Plastic | Injection Molding |  |
| 20 | Top Film Advance Lock | 1 | Plastic | Injection Molding |  |
| 21 | Film Advance Lock Spring | 1 | Steel |  | |
| 22 | Bottom Film Advance Lock | 1 | Plastic | Injection Molding |  |
| 23 | Film Advance Gear Trigger | 1 | Plastic | Injection Molding |  |
| 24 | Film Advance Gear | 1 | Plastic | Injection Molding |  |
| 25 | Lens Mount | 1 | Plastic | Injection Molding |  |
| 26 | Shutter Cover Spring | 1 | Steel |  | |
| 27 | Shutter Cover | 1 | Plastic | Injection Molding |  |
| 28 | Back Inner Shell | 1 | Plastic | Injection Molding |  |
| 29 | Inner Film Spindle | 1 | Plastic | Injection Molding |  |
| 30 | Film | 1 | Various Materials | Various Process |  |
| 31 | Inner Film Spindle | 1 | Plastic | Injection Molding | |
| 32 | Tools used for Disassembly | 1 | Misc |  |
