Group 12 - Fuji Waterproof Camera

From GICLWiki

(Difference between revisions)

Revision as of 04:37, 21 November 2006

Executive Summary

Introduction

The Fuji Waterproof Disposable Camera is a product designed to be user friendly, simple and easy to use under harsh conditions. The camera works just like any other conventional film camera whereby light enters thru the main lens and the image taken gets exposed on a film. The only difference between a normal camera and the disposable camera is that the latter has no power source and all of the parts work mechanically. The other distinct difference is that it also has waterproofing capabilities up to a specfied depth. The disposable camera is design for a single use with the film providing 27 exposures per use. The design of the whole system makes the camera robust and tough for outdoor activities.

Group Members

Chung, Jun Yong
Deyo, Raymond (Wiki Page Master & Group Leader)
Gomez, Adrian (Wiki Page Master)
Heath, Vatsana (Disassembly,CAD Work)

Lewczyk, Tomasz (Assembly)

Before Disassembly

Parts

The table belows lists the Bill of Materials for the disposable camera:

**Table 3.1: Disposable Camera Bill of Materials**
Part #	Part Name	# Req'd	Mat'l	Manufacturing Process
1	Paper Case	1	Paper	Printing and Folding
2	Plastic Packing	1	Plastic
3	Waterproof Strap	1	Plastic	Plastic Shaping
4	Front Waterproof Cover	1	Plastic	Injection Molding
5	Back Waterproof Cover	1	Plastic	Injection Molding
6	Waterproof Seal	1	Rubber	Injection Molding
7	Shutter Release Arm	1	Plastic	Injection Molding
8	Film Spindle	1	ABS Plastic	Injection Molding
9	Shutter Release Clip	1	Plastic	Injection Molding
10	Shutter Release Seal	1	Rubber	Injection Molding
11	Shutter Release Spring	1	Steel	Steel Shaping
12	Outer Film Spindle	1	Plastic	Injection Molding
13	Outer Film Spindle Seal	1	Rubber	Injection Molding
14	Front Chasis	1	Plastic	Injection Molding
15	Camera Lens	1	Plastic	Injection Molding
16	Front Viewfinder	1	Plastic	Injection Molding
17	Back Viewfinder	1	Plastic	Injection Molding
18	Magnifier	1	Plastic	Injection Molding
19	Frame Counter	1	Plastic	Injection Molding
20	Top Film Advance Lock	1	Plastic	Injection Molding
21	Film Advance Lock Spring	1	Steel	Steel Shaping
22	Bottom Film Advance Lock	1	Plastic	Injection Molding
23	Film Advance Gear Trigger	1	Plastic	Injection Molding
24	Film Advance Gear	1	Plastic	Injection Molding
25	Lens Mount	1	Plastic	Injection Molding
26	Shutter Cover Spring	1	Steel	Steel Shaping
27	Shutter Cover	1	Plastic	Injection Molding
28	Back Inner Shell	1	Plastic	Injection Molding
29	Inner Film Spindle	1	Plastic	Injection Molding
30	Film	1	Various Materials	Various Process
31	Inner Film Spindle	1	Plastic	Injection Molding
32	Tools used for Disassembly	1	Misc

Files

Shutter Release Animation

Class Presentation

Group 12 - Fuji Waterproof Camera

Revision as of 04:37, 21 November 2006

Contents

Executive Summary

Introduction

Before Disassembly

Parts

Files

Shutter Release Animation

Views

Personal tools

Navigation

Search

Toolbox

@@ Line 19: / Line 19: @@
 {| border="1" align="center"
 |+ '''Table 3.1: Disposable Camera Bill of Materials'''
-! width="50"|Part # !! width="100"|Part Name !! width="50"|# Req'd !! width="120"|Mat'l !! width="145"| Manufacturing Process !! width="100"|Image
+! width="50"|Part # !! width="100"|Part Name !! width="50"|# Req'd !! width="120"|Mat'l !! width="145"|Reason of Material Used !! width="145" | Manufacturing Process !! width="100"|Image
 |-
 ! 1
@@ Line 25: / Line 25: @@
 | align="center"|1
 | align="center"|Paper
+| align="center"|
 | align="center"| Printing and Folding
 | [[Image:DSC00097.JPG |center|thumb|50px]]
@@ Line 32: / Line 33: @@
 | align="center"|1
 |align="center"| Plastic
+| align="center"|
 | align="center"|
 | align="center"|[[Image:DSC00104.JPG|center|thumb|50px]]
@@ Line 39: / Line 41: @@
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"| Plastic Shaping
 | [[Image:DSC00131.JPG|center|thumb|50px]]
@@ Line 46: / Line 49: @@
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"| Injection Molding
 | [[Image:DSC00188.JPG |center|thumb|50px]]
@@ Line 53: / Line 57: @@
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"| Injection Molding
 | [[Image:DSC00134.JPG |center|thumb|50px]]
@@ Line 60: / Line 65: @@
 | align="center"|1
 | align="center"|Rubber
+| align="center"|
 | align="center"| Injection Molding
 | [[Image:DSC00136.JPG|center|thumb|50px]]
@@ Line 67: / Line 73: @@
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:DSC00178.jpg |center|thumb|50px]]
@@ Line 73: / Line 80: @@
 |align="center"|Film Spindle
 | align="center"|1
 | align="center"|ABS Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:Film_spindle.JPG  |center|thumb|50px]]
@@ Line 80: / Line 88: @@
 |align="center"|Shutter Release Clip
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"| Injection Molding
 | [[Image:DSC00157.JPG |center|thumb|50px]]
@@ Line 87: / Line 96: @@
 |align="center"|Shutter Release Seal
 | align="center"|1
 | align="center"|Rubber
+| align="center"|
 | align="center"| Injection Molding
 | [[Image:DSC00182.JPG  |center|thumb|50px]]
@@ Line 95: / Line 105: @@
 | align="center"|1
 | align="center"|Steel
+| align="center"|
 | align="center"| Steel Shaping
 | [[Image:DSC00169.JPG |center|thumb|50px]]
@@ Line 101: / Line 112: @@
 |align="center"|Outer Film Spindle
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:DSC00202.JPG |center|thumb|50px]]
@@ Line 109: / Line 121: @@
 | align="center"|1
 | align="center"|Rubber
+| align="center"|
 | align="center"| Injection Molding
 | [[Image:Seal2.JPG  |center|thumb|50px]]
@@ Line 115: / Line 128: @@
 |align="center"|Front Chasis
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:DSC00209.JPG  |center|thumb|50px]]
@@ Line 122: / Line 136: @@
 |align="center"|Camera Lens
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:Cameralens.JPG |center|thumb|50px]]
@@ Line 129: / Line 144: @@
 |align="center"|Front Viewfinder
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:Frontviewfinder.JPG |center|thumb|50px]]
@@ Line 137: / Line 153: @@
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:Backviewfinder.JPG |center|thumb|50px]]
@@ Line 143: / Line 160: @@
 |align="center"|Magnifier
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:Magnifier.JPG  |center|thumb|50px]]
@@ Line 151: / Line 169: @@
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:DSC00265.JPG |center|thumb|50px]]
@@ Line 158: / Line 177: @@
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:DSC00275.JPG  |center|thumb|50px]]
@@ Line 164: / Line 184: @@
 |align="center"|Film Advance Lock Spring
 | align="center"|1
 | align="center"|Steel
+| align="center"|
 | align="center"| Steel Shaping
 | [[Image:Filmadvancelockspring.JPG |center|thumb|50px]]
@@ Line 171: / Line 192: @@
 |align="center"|Bottom Film Advance Lock
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:DSC00288.JPG  |center|thumb|50px]]
@@ Line 179: / Line 201: @@
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:DSC00297.JPG  |center|thumb|50px]]
@@ Line 186: / Line 209: @@
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:Filmadvancegear.JPG  |center|thumb|50px]]
@@ Line 193: / Line 217: @@
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:DSC00304.JPG  |center|thumb|50px]]
@@ Line 200: / Line 225: @@
 | align="center"|1
 | align="center"|Steel
+| align="center"|
 | align="center"| Steel Shaping
 | [[Image:DSC00311.JPG  |center|thumb|50px]]
@@ Line 207: / Line 233: @@
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:DSC00315.JPG  |center|thumb|50px]]
@@ Line 214: / Line 241: @@
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:DSC00330.JPG  |center|thumb|50px]]
@@ Line 221: / Line 249: @@
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:DSC00336.JPG  |center|thumb|50px]]
@@ Line 228: / Line 257: @@
 | align="center"|1
 | align="center"|Various Materials
+| align="center"|
 | align="center"|Various Process
 | [[Image:DSC00331.JPG  |center|thumb|50px]]
@@ Line 235: / Line 265: @@
 | align="center"|1
 | align="center"|Plastic
+| align="center"|
 | align="center"|Injection Molding
 | [[Image:DSC00336.JPG  |center|thumb|50px]]
@@ Line 242: / Line 273: @@
 | align="center"|1
 | align="center"|Misc
+| align="center"|
 | align="center"|
 | [[Image:DSC00342.JPG  |center|thumb|50px]]