Group 10 - Kodak Flash Camera

Revision as of 15:21, 7 December 2007

Executive Summary

Our group was assigned to analyze the Kodak zoom disposable camera. Aspects of the camera that we were asked to examine include overall design concept, specific components and their respective functions and features, materials and manufacturing processes used, and develop possible design improvements. Before disassembly began, our group identified the purpose of the camera and made assumptions of how it works. We then tested the camera to see if it worked, predicted how many components make up the complete device, and how many different materials were used. During the disassembly every removed piece and tool used was recorded. The internal pieces of the camera were already numbered- we assumed they were used for assembling the camera at the manufacturing factory. Disassembly of the camera took approximately one hour, while reassembly took only about half an hour. The camera was primarily composed of plastic- with a few small metal and electronic components. Plastic is an excellent material to be used for a one-time use camera because it is inexpensive and can be easily recycled and reused.

Return to Top[1]

Introduction

The purpose of the Kodak disposable camera is to capture photographs in a cheap, convenient, and affordable way for both the consumer and manufacturer. The camera has a flash feature so photographs can be taken in low light situations and zoom for pictures taken at a distance. The technology that a one time use camera possesses is quite remarkable. The benefit of a disposable camera is the consumer never has to deal with film- only the preloaded, ready to use lightweight and hand held device. When it comes time to develop the film, the consumer simply drops off the entire camera. The consumer in return receives their photographs while the manufacturer receives reusable materials which can be made into new disposable cameras. A quick and inexpensive one use camera offers everyone the opportunity to capture new memories.

Return to Top[2]

Research Group Members

Alex Finkel

Jordan Gomes

Kyle Greenzweig

Brian Hamilton

Melissa Maze

Return to Top[3]

Before Disassembly

The purpose of the Kodak Flash Camera is to offer a simple, recyclable, and inexpensive product that offers a quality product in return. The Kodak disposable camera uses multiple forms of energy for it to work. Chemical energy from the battery is transformed to electrical when the capacitor is charged to illuminate the flash. The user of the camera supplies mechanical energy- by pushing buttons, flipping switches, and winding knobs.

Prior to disassembly, the Kodak Flash Camera worked properly. The capacitor charged when the flash button was held, the flash illuminated when the shutter button was pressed, the film advanced the correct distance, and the zoom lens magnified clearly. Although the product was in proper working order, there were many loud sounds that the device made. The wheel to advance the film made a loud clicking noise, the capacitor charging for the flash sounded like a high whining, and when the shutter button was pressed the quick motion of the shutter inside the camera could be heard snapping back into place. We assumed that these noises were due to the camera being manufactured mostly out of plastic and that the inexpensive manufacturing process wasn't meant to make the product operate silently- but to deliver a decent end product.

Other initial assumptions our group made was that the camera was composed of at least 25 parts. We also guessed that the materials used in the camera would be mostly different colors of plastic with small amounts of metal and electronics for the flash. We were unsure how the pieces were held together inside the camera but guessed that there would be some sort of connecting devices or small fasteners.

Return to Top[4]

Disassembly Procedure

The step by step procedure for disassembling the Kodak Flash one time use camera with zoom feature is as follows:

1. First, the stickers located on the back cover were removed using our fingernails.

2. The back cover was then pried off with a small screwdriver and a pocket knife.

3. The battery was the next component removed.

4. The rolled up film and winding spool were then taken out.

5. We then began working on the front of the camera. The front cover was pried off with the small screwdriver.

6. The next piece removed was the flat metal spring that holds in the double lens toggle. The double lens toggle was then removed.

7. We then popped off the small coil spring that hooks the plate that the double lens toggle mounts on (part 9), to a black connecting piece (part 1).

8. Once the spring was off the black connecting piece (part 1) the connecting rod (part 12) fell off.

9. The tiny copper spring that connects the shutter to a fixed point on the circuit board was then taken off.

10. Dissection then began on the top of the camera. We took off a clear plastic piece (part 9), and then took off a gray plastic part (part 16).

11. Then we took the "number of pictures remaining" wheel off, the winding wheel, the winding cam, and part 32- the piece that connects the cam to the winding wheel.

12. Next we took the copper brace that holds the viewing lens in place (part 4). The viewing lens was then removed.

13. We then took off a blue plastic piece (part 9), which was located below the viewing lens.

14. We then went back to the front of the camera and pried off the toggle zoom plate (also labeled part 9) using a small screwdriver and pocket knife.

15. Then the large gray zoom lever arm (part 2) was removed and the shutter simply fell off.

16. We then removed the shutter lever (part 1) which is composed of blue plastic, as well as the spring that holds it in place.

17. Part 101, the small winding gear then fell out. This piece is simply held in place by the winding cam.

18. The circuit board was then pried off using again, the small screwdriver and pocket knife.

19. The plastic insert in the back of the camera, which is responsible for holding many of the camera’s inner components, was then removed.

20. Next, a small metal lever located in the front was removed.

21. The only component remaining was the plastic shell of the camera. The camera is completely disassembled.

Group 10 met in Furnas 621 at 11:00 AM on Friday, October 12, 2007.

During disassembly we noticed that some of the larger pieces were already numbered. This is a useful feature in the manufacturing facility so the camera can be properly assembled. In our disassembly procedure, the part numbers provided in parenthesis are the manufacturer’s part numbers- we later returned to our disassembly procedure and added in the part names that we used in our bill of materials.

The only tools used were our hands, a small screw driver, and a pocket knife. The tools were only used when a component had to be pried off.

The complete disassembly process took approximately one hour. We took extra time to study the internal components and observe how the parts fit together because the process didn't require much force. Disassembly was very simple because we found many of the components were simply held together by gravity, and the compression of the camera's shell; for most of the disassembly components were simply falling off.

Return to Top[5]

Post Disassembly- Component Analysis

(Click on images to enlarge view.)

Part #	Part Name	# Required	Material	Manufacturing Process	Estimated Manufacturing Cost	Function	Image
1	Front Shell	1	ABS Plastic	Injection Molding	$0.05	Front piece of protective housing for internal camera components.
2	Back Shell	1	ABS Plastic	Injection Molding	$0.05	Rear piece of protective housing for internal camera components.
3	Inner Shell	1	ABS Plastic	Injection Molding	$0.04	Internal frame for small camera components.
4	Face Plate	1	ABS Plastic	Injection Molding	$0.04	Protective lens housing.
5	Zoom Toggle Switch	1	ABS Plastic	Injection Molding	$0.02	Allows zoom feature to be enabled or disabled.
6	Photo Box Frame	1	ABS Plastic	Injection Molding	$0.03	Guides film.
7	Zoom Mechanism Brace	1	ABS Plastic	Injection Molding	$0.02	Stabilizes components of zoom feature.
8	Zoom Lever Arm	1	ABS Plastic	Injection Molding	$0.03	Connects the zoom switch with lenses.
9	Zoom Toggle Connecting Piece	1	ABS Plastic	Injection Molding	$0.02	Connects zoom switch to zoom lever arm.
10	Zoom Lever Connecting Rod	1	ABS Plastic	Injection Molding	$0.04	Aids in the placement of the zoom lenses.
11	Zoom Toggle Spring	1	Steel Wire	Formed and Extruded	$0.04	Aids in an easy transition between zoom and standard lenses.
12	Standard 1X lens	1	ABS Plastic	Injection Molding, Polishing	$0.05	Transparent plastic, standard non-zoom photo lens.
13	Zoom Lens Unit (Inner Lens)	1	ABS Plastic	Injection Molding, Polishing	$0.06	Transparent plastic, magnifying inner zoom lens.
14	Zoom Lens Unit (Outer Lens)	1	ABS Plastic	Injection Molding, Polishing	$0.05	Transparent plastic, magnifying outer zoom lens.
15	Zoom Lens Unit (Shell)	1	ABS Plastic	Injection Molding	$0.02	Houses inner and outer zoom lenses.
16	Lens Toggle Face Plate	1	ABS Plastic	Injection Molding	$0.05	Secures standard and zoom lenses to lens toggle frame.
17	Lens Toggle Frame	1	ABS Plastic	Injection Molding	$0.10	Housing for standard and zoom lenses.
18	Shutter	1	Steel	Formed and Shaped	$0.10	Allows light to enter camera and exposure of film.
19	Shutter Spring	1	Copper Wire	Formed and Extruded	$0.05	Allows rapid movement of shutter.
20	View Finder Lens	1	ABS Plastic	Injection Molding, Polished	$0.02	Allows camera operator to accurately see what will be captured on the film.
21	View finder Lens Brace	1	Copper	Heated and Formed	$0.02	Secures the view finer lens inside the camera.
22	View finder Lens Toggle Switch	1	ABS Plastic	Injection Molding	$0.02	Zooms view finder lens. Allows camera operator to accurately see what will be captures on the film using the zoom feature.
23	Pictures Remaining Window/View Finder Cover	1	ABS Plastic	Injection Molding, Polished	$0.05	A protective transparent plastic cover for the picture remaining wheel and the view finder lens.
24	Shutter Button	1	ABS Plastic	Injection Molding	$0.07	When button is pressed the shutter opens; how the camera operator takes a picture.
25	Film Advance Wheel*	1	ABS Plastic	Injection Molding	$0.05	Camera operator manually rotates wheel with thumb to advance film.
26	Pictures Remaining Wheel*	1	ABS Plastic	Injection Molding, Painted	$0.08	Visually displays the approximate remaining number of photographs left on the camera.
27	Film Advance Gear*	1	ABS Plastic	Injection Molding	$0.05	Guides film using holes that are manufactured onto the edges of the film.
28	Winding Cam*	1	ABS Plastic	Injection Molding	$0.05	Aids in proper winding of film.
29	Shutter Arm	1	ABS Plastic	Injection Molding	$0.05	Component that allows the shutter to move.
30	Shutter Arm Spring	1	Steel Wire	Formed and Extruded	$0.03	Aids in quick movement of shutter arm.
31	Advance Arm*	1	ABS Plastic	Injection Molding	$0.05	Allows film to advance only one frame at a time.
32	Advance Arm brace	1	Steel	Formed and Molded	$0.03	Reinforces the advance arm to limit film advancement.
33	Flash Unit	1	Steel, ABS Plastic, Flash Bulb	Formed and Bent, Injection Molded, Blow Molded with Assembly	$0.35	Once charged through the capacitor, the flash can illuminate dark environments for clearer pictures.
34	Flash Circuit Board	1	Silicon, Solder, and various metals and plastics	Machined and soldered	$0.60	Electronic component responsible for coordinating the flash bulb and capacitor.
35	Capacitor	1	Metal and Plastic	Formed and Soldered	$0.30	Creates increased charge to illuminate flash bulb.
36	Film Spindle	1	ABS Plastic	Injection Molding	$.08	Film is stored and rolled around the spindle.
37	KODAK 800 Speed Film*	1 roll @ 27 exposures	Varies	Chemical Bonded	$0.45	After exposure to light by the shutter, images are stored on the film.
38	1.5V Alkaline AA battery	1	Steel and various Chemicals	Formed and Shaped	$0.15	Source of power to charge capacitor and illuminate flash bulb.

(Parts with * next to their names are shown in a 3D exploded assembly drawing in the following section.)

Our group estimated the approximate cost to manufacture the Kodak one time use flash camera with zoom to be $3.36.

The prices of each component were calculated based on the size, complexity, manufacturing process, and material used. We assumed that the most expensive parts were the film and electronic components- such as the flash, circuit board, battery, and capacitor. Using plastics as the major material is a wise choice for a one time use camera because it is a cheap but sturdy material and the majority of the camera can be easily recycled and reused to create new one time use cameras. The approximate manufacturing cost that we calculated is below what a disposable camera would be sold for in a store. We concluded this is a logical situation because the manufacturer would be seeking making a profit from their product.

More disassembly photographs:

Return to Top[6]

3D CAD Exploded Assembly Diagram

Pictured above is the assembly of the film advancement system inside the Kodak disposable camera. The components that are included in this diagram can be found in the above chart with a more in depth explanation of their specific functions. The part numbers are 25, 26, 27, 28, 31, and 37.

Assembled, the partially exposed film advance wheel (Part 25) and the remaining pictures display (Part 26) located on the top of the camera make up the more familiar idea of the film advancing procedure in a disposable camera. (The shutter button (Part 24) can also be seen in this photograph.)

Return to Top[7]

Reassembly

The following is our step by step procedure for reassembling the Kodak flash disposable camera:

1. The inner shell of the camera is the first piece we began reassembly with so the many smaller camera components could be properly placed.

2. The metal advance arm was slid back into place.

3. The circuit board was firmly pressed and snapped back into the retaining clips at its original location on the right side. We only needed to use our hands to reinsert the circuit board.

4. The winding cam was then inserted on the left side, and the winding gear was put into place right after near the metal advance arm. These parts rest on each other.

5. The spring that is responsible for holding the shutter lever in place was difficult to maneuver. We used the pocket knife and our hands, to put these components back into the camera. Reinserting the spring took us several attempts.

6. The components of the shutter were laid into position.

7. The copper spring that attaches the shutter to a fixed point of the circuit board was reattached after several attempts. We used our hands, knife, and screwdriver for reassembly of this piece.

8. Next, the viewing lens, viewing lens brace, and the zoom toggle for the viewing lens were all aligned and set into place on the top of the inner shell.

9. The winding wheel, number of pictures remaining wheel, and the piece which connects it to the winding cam were reinserted and connected together.

10. The zoom and standard lens housing and face plate was reassembled with each lens in its respective place. The lens housing was not yet inserted into the camera.

11. The clear piece that covers the remaining pictures wheel on the top of the camera, and the shutter button were reinstalled.

12. The zoom lever arm, brace, toggle connecting piece, and zoom connecting arm were the first pieces of the zoom system to be reinserted into the camera shell. They loosely sit into place for now; once the lens housing is in place the pieces will create a firmer connection together.

13. The lens housing is now inserted onto the front of the inner shell. The previously inserted levers and toggle pieces now connect with the lens housing to allow movement between the standard and zoom lens.

14. The coil spring connecting to the zoom toggle connecting piece and the lens housing plate was reconnected. Again, our hands, pocket knife, and the small screwdriver were used to reconnect the spring. This reassembly step also took several attempts.

15. The zoom toggle switch and flatter spring which connects it was also reinserted. This spring was very difficult to reconnect because of its small size. Again, all of our tools were used as well as multiple attempts.

16. The film, winding spool, and battery were reinserted to their proper places.

17. The rear and front camera covers were then pressed together around the inner shell.

18. Stickers were reapplied to camera to insure firm connection between rear and front shells.

19. The Kodak disposable camera with flash and zoom feature is completely reassembled.

Return to Top[8]

Post Reassembly Observations

Reassembly was difficult because some of the plastic pieces were warped from the initial disassembly. Many of the pieces simply connected to each other, so assembling them in the proper order was frustrating at times. The springs were difficult to keep track of and very difficult to reinsert. The majority of our reassembly time was spent reconnecting the springs to their proper places.

After reassembly, our Kodak disposable camera seemed to be in working order. The warped pieces from disassembly seemed to slightly hinder the performance, but overall the components worked properly. The image quality might be questionable if we were to develop our film because our film was exposed.

The reassembly was almost the exact opposite of the disassembly. A few steps were different because during disassembly components sometimes just fell off. During reassembly these pieces needed to be reinserted at specific times. The same tools we used for disassembly were used for our reassembly. A pair of needle nose pliers or tweezers would have been a valuable tool in reinserting the springs, but we did not have access to either during our reassembly phase.

In engineering this product, precise models would probably be used. The parts are so small that a minor miscalculation or manufacturing mistake would probably greatly alter or completely disrupt the performance of the device.

Return to Top[9]

Product Improvements

Presentation

Below is a link to our group's Kodak flash disposable camera analysis Power Point presentation. Group members Brian Hamilton and Alex Finkel presented to the University at Buffalo MAE277 class on Monday November 26, 2007.

Media:Kodak Flash Dissection.ppt

Return to Top[10]

Refrences and Outside Links

"KODAK Zoom Single Use Camera" November 22, 2007, KODAK Zoom Single Use Camera

Return to Top[11]