Group 10 - GM V-6 Engine 1
From GICLWiki
(Difference between revisions)
(→Executive Summary1) |
|||
| Line 1: | Line 1: | ||
== Executive Summary == | == Executive Summary == | ||
| − | + | Our goal is to reverse engineer a GM V-6 engine. We will completely disassemble the engine and analyze the parts to see how and why they function. | |
== Introduction == | == Introduction == | ||
Revision as of 22:23, 27 September 2010
Contents |
Executive Summary
Our goal is to reverse engineer a GM V-6 engine. We will completely disassemble the engine and analyze the parts to see how and why they function.
Introduction
Members
- Sam Pierangelo
- Jared Prosser
- Jim Hickel
- Ben Kuch
- Ed Bishop
Product
- Manufacturer: General Motors
- Model: Vortec 4300 V6 Engine
- Approximate year of production: NA
- Types of vehicles engine is used for:
- Our task was to reverse engineer a Vortec 4300 V6 engine manufactured by General Motors.
Gate 1: Project Planning
View our Request for Proposal:
Group_10_-_GM_V-6_Engine_Gate1
Gate 2: Preliminary Design Review
View our Preliminary Design Review:
Group_10_-_GM_V-6_Engine_Gate2
Gate 3: Coordination Review
View our Coordination Review:
Group_10_-_GM_V-6_Engine_Gate3
Gate 4: Critical Design Review
View our Critical Design Review:
Group_10_-_GM_V-6_Engine_Gate4
