Gate 4 - Product Explanation (Group 10)

Here we talk about how our group is going to address problems that arrise in this gate. For challenges that have been we describe how our group dealt with the problems.

• Project Management gate 4 -(Group 10)

Here we provide a step by step process describing how our product was reassembled. Being extremely specific, this description includes the tools used and how they where used. We brefly describe challenges during reassembly in the introduction and throughout the steps utalizing our complexity scale and also outline those challenges and describe how they were overcome. Using our outline an individual not familiar with the product should be able to successfully reassemble our snow blower.

• Product Reassembly -(Group 10)

• Assembly Complexity Scale - (Group 10)

• Parts List-(Group 10)

Here our group identifys three mechanisms that our device uses to generate specific motion, control system behavior, modify/condition energy, etc. For these mechanisms we identify their technical name, clearly state their purpose, document how the mechanism works, and provide equations which are required for the design of the mechanism.

• Mechanisms -(Group 10)

In this section we recomend 3 design changes for the product at the system level, this includes features we would change or eliminate. These changes address the global, societal, economic, or environmental concerns. These changes are ment to improve the performance, serviceability, and overall value of the snow blower, with the target audience and price kept in consideration.

• Design Revisions gate 4 -(Group 10)