Dell 720 Color Inkjet Printer

Bucknell Mechanical Design Home

Dell 720 Inkjet Printer

Function

The dell printer is designed to print ink onto papers. This is a cheaper version of a printer and is often given out by dell free with the purchase of a computer bundle.

How The Printer Works

The Primary function of the printer is to spray the ink onto the paper in distinguishable patterns.

This is accomplished by:

1. Feeding in the paper.

2. Moving the ink jets laterally.

3. Spraying the ink onto the paper.

4. Feeding the paper out of the system.

Components

The table belows Contains the Components in the Dell 720 Inkjet Printer:

Table 1: Dell 720 Inkjet Component List

Part #	Part Name	Category	Function	Material	Picture
1	Casing	Structural Component	Protection	Plastic
2	Roller #1	Output / Transmission	Brings Paper from feeder into tray	Plastic / Rubber coating
3	Motor #1 (Right Motor)	Input	Power Feed system for gear train	Metal motor, plastic components
4	Printer Housing	Structural Component	Protects internal components from the environment	Plastic
5	Printer Housing	Structural Component	Protects internal components from the environment	Plastic
6	Printer Housing	Structural Component	Protects internal components from the environment	Plastic
7	Printer Housing	Structural Component	Protects internal components from the environment	Plastic
8	Printer Housing	Structural Component	Protects internal components from the environment	Plastic

Lets Head to the Computer

After looking at the components that make up a printer we modeled two of the components to healp us quantitativly verify how the printer works.

The Slider Mechanism

One motion of the printer that can be modeled and explored is the action of the inkjet acriss the paper. This is shown below modeled with the inkjet, the rod it slides along, the motor and the belt that controlls the motion.

Figure 1: Isometric View

Figure 2: Top View

Figure 3: Front View

|}

The Adams Analysis

To analyze the data we can model this system in adams. The simulation to be run will use a step function to define the velocity of the printer head across the paper. This velocity was calculated from the knowledge of how many pages per minute the printer prints and turns out to be 39 inches per second. With this data we can run a simplified simulation of the printers motion.