Black and Decker Dustbuster

From GICLWiki

(Difference between revisions)

Revision as of 12:12, 30 January 2008

Listed below is the Bill of Materials for the Black and Decker Dustbuster:

**Table 1: Black and Decker Dustbuster Bill of Materials**
Part #	Part Name	Category	Function	Material
1	Battery Pack	Input	Powers the vacuum.	8 Recyclable Rechargable Nickel Cadmium batteries with wire and metal connections.
2	Impeller	Output	Creates suction for the vacuum.	Plastic
3	Motor with Fan	Input	Motor spins the impeller while the spinning fan pulls heat from the motor.	Steel outer shell with a plastic fan and coils of copper wires
4	Speed controller	Motion Conversion Element	Allows for varying the speed of the motor and impeller.	Plastic plates with copper connectors
5	Electric Circuitry	Input	Supplies the appropriate current to the motor.	Plastic base with brass connectors and one resistor
6	Outer Plastic Casing	Structural Components	Protects the inner working parts and provides safety for the user.	Plastic
7	Motor Shaft	Transmission	Connects the motor to the impeller and causes the impeller to turn when the motor does.	Steel
8	Charging station	Input	Charges the batteries inside of the dustbuster.	Plastic with metal connections

@@ Line 7: / Line 7: @@
 {| border="1" align="center"
 |+ '''Table 1: Black and Decker Dustbuster Bill of Materials'''
-! width="50"|Part # !! width="100"|Part Name !! width="50"| Category !! width="120"|Function!! width="145"| Material !! width="100"|Picture
+! width="50"|Part # !! width="100"|Part Name !! width="50"|   Category !! width="120"|Function!! width="145"| Material !! width="100"|Picture
 |-
 ! 1
@@ Line 39: / Line 39: @@
 ! 5
 |align="center"|Electric Circuitry
-| align="center"|Input (?)
+| align="center"|Input
 | align="center"|Supplies the appropriate current to the motor.
 | align="center"|Plastic base with brass connectors and one resistor