Black and Decker Dustbuster
From GICLWiki
(Difference between revisions)
ThomasCleere (Talk | contribs) (→Parts) |
|||
| Line 19: | Line 19: | ||
|align="center"|Creates suction for the vacuum. | |align="center"|Creates suction for the vacuum. | ||
| align="center"|Plastic | | align="center"|Plastic | ||
| − | | align="center"|[[Image: | + | | align="center"|[[Image:impeller2.JPG|center|thumb|50px]] |
|- | |- | ||
! 3 | ! 3 | ||
Revision as of 18:15, 29 January 2008
Parts
Listed below is the Bill of Materials for the Black and Decker Dustbuster:
| Part # | Part Name | Category | Function | Material | Picture |
|---|---|---|---|---|---|
| 1 | Battery Pack | Input | Powers the vacuum. | 8 Recyclable Rechargable Nickel Cadmium batteries with wire and metal connections. |  |
| 2 | Impeller | Output | Creates suction for the vacuum. | Plastic |  |
| 3 | Motor with Fan | Input | Motor spins the impeller while the spinning fan pulls heat from the motor. | Steel outer shell with a plastic fan and coils of copper wires |  |
| 4 | Speed controller | Motion Conversion Element | Allows for varying the speed of the motor and impeller. | Plastic plates with copper connectors |  |
| 5 | Electric Circuitry | Input (?) | Supplies the appropriate current to the motor. | Plastic base with brass connectors and one resistor |  |
| 6 | Outer Plastic Casing | Structural Components | Protects the inner working parts and provides safety for the user. | Plastic |  |
| 7 | Motor Shaft | Transmission | Connects the motor to the impeller and causes the impeller to turn when the motor does. | Steel |  |
| 8 | Charging station | Input | Charges the batteries inside of the dustbuster. | Plastic with metal connections |  |
