Black and Decker Dustbuster
From GICLWiki
(Difference between revisions)
ThomasCleere (Talk | contribs) (→Parts) |
ThomasCleere (Talk | contribs) (→Parts) |
||
| Line 5: | Line 5: | ||
{| border="1" align="center" | {| border="1" align="center" | ||
|+ '''Table 1: Black and Decker Dustbuster Bill of Materials''' | |+ '''Table 1: Black and Decker Dustbuster Bill of Materials''' | ||
| − | ! width="50"|Part # !! width="100"|Part Name !! width="50"| | + | ! width="50"|Part # !! width="100"|Part Name !! width="50"| align="center"|Category !! width="120"|Function!! width="145"| Material !! width="100"|Picture |
|- | |- | ||
! 1 | ! 1 | ||
Revision as of 12:36, 28 January 2008
Parts
Listed below is the Bill of Materials for the Black and Decker Dustbuster:
| Part # | Part Name | align="center"|Category | Function | Material | Picture |
|---|---|---|---|---|---|
| 1 | Battery Pack | Input | Powers the vacuum. | 8 Recyclable Rechargable Nickel Cadmium batteries with wire and metal connections. |  |
| 2 | Impeller | Output | Creates suction for the vacuum. | Plastic |  |
| 3 | Motor with Fan | Input | Motor spins the impeller while the spinning fan pulls heat from the motor. | Steel outer shell with a plastic fan and coils of copper wires |  |
| 4 | Speed controller | Motion Conversion Element | Allows for varying the speed of the motor and impeller. | Plastic plates with copper connectors |  |
| 5 | Electric Circuitry | Input (?) | Supplies the appropriate current to the motor. | Plastic base with brass connectors and one resistor |  |
| 6 | Outer Plastic Casing | Structural Components | Protects the inner working parts and provides safety for the user. | Plastic |  |
| 7 | Motor Shaft | Transmission | Connects the motor to the impeller and causes the impeller to turn when the motor does. | Steel |  |
| 8 | Charging station | Input | Charges the batteries inside of the dustbuster. | Plastic with metal connections |  |
