Difference between revisions of "ROS (Robot Operating System)"

From GICL Wiki
Jump to: navigation, search
Line 18: Line 18:
 
This command should fix it:
 
This command should fix it:
 
<pre>$ rosparam set p2os/port /dev/ttyUSB0</pre>
 
<pre>$ rosparam set p2os/port /dev/ttyUSB0</pre>
 +
 +
==== Control with Keyboard ====
 +
After starting the p2os driver and everything, you can control the robot via keyboard with:
 +
<pre>$ roslaunch p2os_launch teleop_keyboard.launch</pre>
  
 
=== Localization Links ===
 
=== Localization Links ===
Line 39: Line 43:
 
* http://www.ros.org/wiki/pcl
 
* http://www.ros.org/wiki/pcl
  
== robot commands ==
 
After starting the p2os driver and everything, you can control the robot via keyboard with:
 
<pre>$ roslaunch p2os_launch teleop_keyboard.launch</pre>
 
  
 
== SLAM, tf, Navigation ==
 
== SLAM, tf, Navigation ==

Revision as of 13:10, 26 April 2012

http://www.ros.org/wiki/

Contents

p2os

The ROS stack for hooking up to the pioneer.

Installing

http://www.ros.org/wiki/p2os/Tutorials/Getting%20Started%20with%20p2os After following the directions above, we have to set the p2os/port to our cable's device name:

$ rosparam set p2os/port /dev/ttyUSB0

Running

Run on the base:

$ rosrun p2os_driver p2os

Run on the computer controlling the base:

$ rosrun p2os_dashboard p2os_dashboard

If you get an error like:

P2OS connection opening serial port /dev/ttyS0...

This command should fix it:

$ rosparam set p2os/port /dev/ttyUSB0

Control with Keyboard

After starting the p2os driver and everything, you can control the robot via keyboard with:

$ roslaunch p2os_launch teleop_keyboard.launch

Localization Links

!! - Updated April 19th

Point Cloud Library


SLAM, tf, Navigation