Difference between revisions of "Kodak Camera Dissection"

From GICL Wiki
Jump to: navigation, search
(GICL Bot: Updated link(s))
 
(21 intermediate revisions by one user not shown)
Line 6: Line 6:
 
This product is a one-time use, waterproof camera manufactured by Kodak. It has 23 distinct parts with the majority being made of ABS Plastic and by injection molding.
 
This product is a one-time use, waterproof camera manufactured by Kodak. It has 23 distinct parts with the majority being made of ABS Plastic and by injection molding.
  
== How It Works ==
+
For additional disassembly information including videos see:
The camera is all mechanical with no electrical components (the exception is a camera with a flash, where a circuit board and battery are included, but that is not the case in this model).
+
  
When the photographer depresses the shutter button (which is actually just an extension of the "Viewfinder"), the button moves the "Shutter Lever" to one side, rotating the "Shutter" until the "Shutter Spring" forces the "Shutter Lever" to return to a halfway position. The "Shutter" cannot be rotated again until the "Shutter Lever" is reset. The "Shutter" remains open for only a fraction of a second, as the "Shutter Spring" retracts it as soon as the "Shutter Lever" passes, allowing light to pass through both lenses to the exposed film. During the "Shutter Lever" movement, the "Camshaft" is offset slightly by an extension from the "Shutter Lever" which releases the "Film Advance Lock."
+
[[Kodak_Waterproof_One-Time-Use_Camera]]
  
With the picture taken, the photographer winds the "Film Advance Wheel" which rolls up film into the "Film Canister" and clicks off numbers on the "Frame Counter." The film is slotted onto the "Sprocket" which is joined to the "Camshaft" causing both to rotate with the film. When the "Camshaft" rotates a complete cycle, the "Shutter Lever" is reset and the "Film Advance Lock" returns to its original position preventing operation of the "Film Advance Wheel".
+
==Camera Assembly==
  
The purpose of the "Exterior Front" and "Exterior Back" covers are to protect the camera from the elements. The "Outside Film Advance" allows the rotation of the "Film Advance Wheel" despite the exterior covers. The "Washer" seals the hole between the "Outside Film Advance" shaft and the "Film Advance Wheel"
+
<!--GICL Bot edit:-->[[Camera Assembly.zip Contents|Camera Assembly as ACIS, STL, STP, and Alibre]]
  
The "Lens Holder" and "Eyehole Holder" serve to hold their respective components in place. The "Eyehole Cover" allows only a small fraction of the incoming light to be focused on the "Inner Lens" giving a sharper, clearer image.
+
[[Media:camera_seq.pdf|Camera 3D PDF Disassembly Animation]]
  
==Parts==
+
[[Media:camera_assem.pdf|Camera 3D PDF Assembly]]
  
The table belows lists the Bill of Materials for the disposable camera:
+
 
 +
==Disassembly Analysis==
  
 
{| border="1" align="center"
 
{| border="1" align="center"
|+ '''Table 3.1: Disposable Camera Bill of Materials'''
+
|+ '''Table 1: List of Models for Download''' <br>''(Zipped ACIS, IGS, STL, STP, AD_PRT Files)''
! width="50"|Part # !! width="100"|Part Name !! width="50"|# Req'd !! width="120"|Mat'l !! width="145"| Manufacturing Process !! width="100"|Image
+
! width="100" align="center"|Part # !! width="250" align="center"|Part Name !! width="170" align="center"|Image !! width="125" align="center"|CAD Models !! width="100" align="center"|3D PDF
 
|-
 
|-
 
! 1
 
! 1
| align="center"|Back Interior
+
| align="center"|Rear Main Housing
| align="center"|1
+
| [[Image:Camera back interior.JPG |center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Camera 3d Back Interior.zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:black interior.pdf|3D PDF]]
| [[Image:Camera back interior.JPG |center|thumb|50px]]
+
 
|-
 
|-
 
! 2
 
! 2
|align="center"|Back Plastic Cover
+
| align="center"|Rear Waterproof Casing
| align="center"|1
+
| [[Image:Camera Back Exterior Cover.JPG |center|thumb|100px]]
|align="center"|ABS Plastic  
+
| [[media:Camera 3D Back Plastic Cover.zip |CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Back Plastic Cover.pdf|3D PDF]]
| align="center"|[[Image:Camera Back Exterior Cover.JPG|center|thumb|50px]]
+
 
|-
 
|-
 
! 3
 
! 3
|align="center"|Camshaft  
+
| align="center"|Camshaft  
| align="center"|1
+
| [[Image:Camera Camshaft.JPG |center|thumb|100px]]
| align="center"|ABS Plastic
+
| [[media:Camera 3d Camshaft.zip |CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Camshaft.pdf |3D PDF]]
| [[Image:Camera Camshaft.JPG |center|thumb|50px]]
+
 
|-
 
|-
 
! 4
 
! 4
|align="center"|Eyehole for Shutter  
+
| align="center"|Eyehole for Shutter
| align="center"|1
+
| [[Image:Camera Eyehole.JPG |center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Eyehole for Shutter.zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Eyehole.pdf|3D PDF]]
| [[Image:Camera Eyehole.JPG |center|thumb|50px]]
+
 
|-
 
|-
 
! 5
 
! 5
|align="center"|Film Advance Gear  
+
| align="center"|Film Advance Gear  
| align="center"|1
+
| [[Image:Camera Film Advance.JPG |center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Camera 3d Film Advance.zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Film Advance.pdf|3D PDF]]
| [[Image:Camera Film Advance.JPG |center|thumb|50px]]
+
 
|-
 
|-
 
! 6
 
! 6
|align="center"|Film Advance Lock
+
| align="center"|Film Advance Lock
| align="center"|1
+
| [[Image:Camera Advance Lock.JPG|center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Camera 3d Film Advance Lock (plastic 2).zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Film Advance Lock.pdf|3D PDF]]
| [[Image:Camera Advance Lock.JPG|center|thumb|50px]]
+
 
|-
 
|-
 
! 7
 
! 7
|align="center"|Film Canister
+
| align="center"|Film Canister
| align="center"|1
+
| [[Image:FilmCanister.jpg |center|thumb|100px]]
| align="center"|Varied
+
| <!--GICL Bot edit:-->[[Camera 3d Film Canister.zip Contents|CAD Package]]
| align="center"|Varied
+
| [[media:Camera Film Canister.pdf|3D PDF]]
| [[Image:FilmCanister.jpg |center|thumb|50px]]
+
 
|-
 
|-
 
! 8
 
! 8
|align="center"|Film Spindle  
+
| align="center"|Film Spindle  
| align="center"|1
+
| [[Image:Camera Spindle.JPG  |center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Camera 3d Film Spindle.zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Film Spindle.pdf|3D PDF]]
| [[Image:Camera Spindle.JPG  |center|thumb|50px]]
+
 
|-
 
|-
 
! 9
 
! 9
|align="center"|Frame Counter  
+
| align="center"|Frame Counter  
| align="center"|1
+
| [[Image:Camera Frame Counter.JPG |center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Camera 3d Frame Counter.zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Frame Counter.pdf|3D PDF]]
| [[Image:Camera Frame Counter.JPG |center|thumb|50px]]
+
 
|-
 
|-
 
! 10
 
! 10
|align="center"|Front Interior
+
| align="center"|Front Main Housing
| align="center"|1
+
| [[Image:Camera front interior.JPG  |center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Camera 3d Front Interior.zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Front Interior.pdf|3D PDF]]
| [[Image:Camera front interior.JPG  |center|thumb|50px]]
+
 
|-
 
|-
 
! 11
 
! 11
|align="center"|Front Plastic Cover
+
| align="center"|Front Waterproof Casing
| align="center"|1
+
| [[Image:Camera front exterior.JPG |center|thumb|100px]]
| align="center"|ABS Plastic and Rubber
+
| <!--GICL Bot edit:-->[[Camera 3d Front Plastic Cover.zip Contents|CAD Package]]
| align="center"|Injection Molding and Molding
+
| [[media:Camera Front Plastic Cover.pdf|3D PDF]]
| [[Image:Camera front exterior.JPG |center|thumb|50px]]
+
 
|-
 
|-
 
! 12
 
! 12
|align="center"|Inner Lens  
+
| align="center"|Inner Lens  
| align="center"|1
+
| [[Image:Camera Inner Lens.JPG |center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Camera 3d Inner Lens.zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera_Inner_Lens.pdf|3D PDF]]
| [[Image:Camera Inner Lens.JPG |center|thumb|50px]]
+
 
|-
 
|-
 
! 13
 
! 13
|align="center"|Interior Body
+
| align="center"|Interior Housing
| align="center"|1
+
| [[Image:Camera Interior.JPG  |center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Camera 3d Interior.zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Interior Body.pdf|3D PDF]]
| [[Image:Camera Interior.JPG  |center|thumb|50px]]
+
 
|-
 
|-
 
! 14
 
! 14
|align="center"|Lens Holder  
+
| align="center"|Lens Holder  
| align="center"|1
+
| [[Image:Camera Lens Holder.JPG  |center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Camera 3d Lens Holder.zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Lens Holder.pdf|3D PDF]]
| [[Image:Camera Lens Holder.JPG  |center|thumb|50px]]
+
 
|-
 
|-
 
! 15
 
! 15
|align="center"|Outer Lens
+
| align="center"|Outer Lens
| align="center"|1
+
| [[Image:Camera Outer Lens.JPG |center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Camera 3d Outer Lens.zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Outer Lens.pdf |3D PDF]]
| [[Image:Camera Outer Lens.JPG |center|thumb|50px]]
+
 
|-
 
|-
 
! 16
 
! 16
|align="center"|Outside Film Advance  
+
| align="center"|Outside Film Advance  
| align="center"|1
+
| [[Image:Camera Exterior film advance.JPG |center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Camera 3d Outside Film Advance.zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Outside Film Advance.pdf|3D PDF]]
| [[Image:Camera Exterior film advance.JPG |center|thumb|50px]]
+
 
|-
 
|-
 
! 17
 
! 17
|align="center"|Shutter  
+
| align="center"|Shutter  
| align="center"|1
+
| [[Image:Camera Shutter.JPG |center|thumb|100px]]
| align="center"|1040 Steel
+
| <!--GICL Bot edit:-->[[Camera 3d Shutter.zip Contents|CAD Package]]
| align="center"|Stamping
+
| [[media:Camera 3d Shutter.pdf|3D PDF]]
| [[Image:Camera Shutter.JPG |center|thumb|50px]]
+
 
|-
 
|-
 
! 18
 
! 18
|align="center"|Shutter Lever  
+
| align="center"|Shutter Lever  
| align="center"|1
+
| [[Image:Camera Shutter Lever.JPG  |center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Camera 3d Shutter Lever.zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Shutter Lever.pdf|3D PDF]]
| [[Image:Camera Shutter Lever.JPG  |center|thumb|50px]]
+
 
|-
 
|-
 
! 19
 
! 19
|align="center"|Shutter Spring
+
| align="center"|Shutter Spring
| align="center"|1
+
| [[Image:Camera shutter spring.JPG |center|thumb|100px]]
| align="center"|1040 Steel
+
| <!--GICL Bot edit:-->[[Camera 3d Shutter Spring.zip Contents|CAD Package]]
| align="center"|Forming
+
| [[media:Camera Shutter Spring.pdf|3D PDF]]
| [[Image:Camera shutter spring.JPG |center|thumb|50px]]
+
 
|-
 
|-
 
! 20
 
! 20
|align="center"|Spring for Shutter Lever  
+
| align="center"|Spring for Shutter Lever  
| align="center"|1
+
| [[Image:Camera Shutter Lever Spring.JPG  |center|thumb|100px]]
| align="center"|1040 Steel
+
| <!--GICL Bot edit:-->[[Camera 3d Spring for Plastic.zip Contents|CAD Package]]
| align="center"|Forming
+
| [[media:Camera Spring for Lever.pdf|3D PDF]]
| [[Image:Camera Shutter Lever Spring.JPG  |center|thumb|50px]]
+
 
|-
 
|-
 
! 21
 
! 21
|align="center"|Sprocket  
+
| align="center"|Sprocket  
| align="center"|1
+
| [[Image:Camera Sprocket.JPG |center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Camera 3d Sprocket.zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Sprocket.pdf|3D PDF]]
| [[Image:Camera Sprocket.JPG |center|thumb|50px]]
+
 
|-
 
|-
 
! 22
 
! 22
|align="center"|Viewfinder
+
| align="center"|Viewfinder
| align="center"|1
+
| [[Image:Camera Viewfinder.JPG |center|thumb|100px]]
| align="center"|ABS Plastic
+
| <!--GICL Bot edit:-->[[Camera 3d Top Clear piece.zip Contents|CAD Package]]
| align="center"|Injection Molding
+
| [[media:Camera Viewfinder Holder.pdf|3D PDF]]
| [[Image:Camera Viewfinder.JPG  |center|thumb|50px]]
+
 
|-
 
|-
 
! 23
 
! 23
|align="center"|Washer
+
|align="center"|Seal for Film Advance
| align="center"|1
+
| [[Image:Camera Washer.JPG  |center|thumb|100px]]
| align="center"|Rubber
+
| <!--GICL Bot edit:-->[[Camera 3d Washer.zip Contents|CAD Package]]
| align="center"|Molding
+
| [[media:Camera Washer.pdf|3D PDF]]
| [[Image:Camera Washer.JPG  |center|thumb|50px]]
+
 
|}
 
|}

Latest revision as of 18:07, 17 March 2009

Figure 1: Fully assembled product

Description

This product is a one-time use, waterproof camera manufactured by Kodak. It has 23 distinct parts with the majority being made of ABS Plastic and by injection molding.

For additional disassembly information including videos see:

Kodak_Waterproof_One-Time-Use_Camera

Camera Assembly

Camera Assembly as ACIS, STL, STP, and Alibre

Camera 3D PDF Disassembly Animation

Camera 3D PDF Assembly


Disassembly Analysis

Table 1: List of Models for Download
(Zipped ACIS, IGS, STL, STP, AD_PRT Files)
Part # Part Name Image CAD Models 3D PDF
1 Rear Main Housing
Camera back interior.JPG
CAD Package 3D PDF
2 Rear Waterproof Casing
Camera Back Exterior Cover.JPG
CAD Package 3D PDF
3 Camshaft
Camera Camshaft.JPG
CAD Package 3D PDF
4 Eyehole for Shutter
Camera Eyehole.JPG
CAD Package 3D PDF
5 Film Advance Gear
Camera Film Advance.JPG
CAD Package 3D PDF
6 Film Advance Lock
Camera Advance Lock.JPG
CAD Package 3D PDF
7 Film Canister
FilmCanister.jpg
CAD Package 3D PDF
8 Film Spindle
Camera Spindle.JPG
CAD Package 3D PDF
9 Frame Counter
Camera Frame Counter.JPG
CAD Package 3D PDF
10 Front Main Housing
Camera front interior.JPG
CAD Package 3D PDF
11 Front Waterproof Casing
Camera front exterior.JPG
CAD Package 3D PDF
12 Inner Lens
Camera Inner Lens.JPG
CAD Package 3D PDF
13 Interior Housing
Camera Interior.JPG
CAD Package 3D PDF
14 Lens Holder
Camera Lens Holder.JPG
CAD Package 3D PDF
15 Outer Lens
Camera Outer Lens.JPG
CAD Package 3D PDF
16 Outside Film Advance
Camera Exterior film advance.JPG
CAD Package 3D PDF
17 Shutter
Camera Shutter.JPG
CAD Package 3D PDF
18 Shutter Lever
Camera Shutter Lever.JPG
CAD Package 3D PDF
19 Shutter Spring
Camera shutter spring.JPG
CAD Package 3D PDF
20 Spring for Shutter Lever
Camera Shutter Lever Spring.JPG
CAD Package 3D PDF
21 Sprocket
Camera Sprocket.JPG
CAD Package 3D PDF
22 Viewfinder
Camera Viewfinder.JPG
CAD Package 3D PDF
23 Seal for Film Advance
Camera Washer.JPG
CAD Package 3D PDF