Group 29 - Homelite Line Trimmer
Note: For optimal viewing of the content on this page, please maximize the size of the window of your given internet browser.
Addressed herein is the reverse engineering of the UT 15151 Homelite® VersaTool™ line trimmer undertaken by group 29 of MAE 277, SUNY-Buffalo, for the Fall 2009 semester. Documentation of the development of the semester-long project entails a record of an evolving engineering process distilled into five discrete, successive "gates", designated as the following:
- Gate I: Request for Proposal, which contains details germane to the Work Proposal, Project Management and the Initial Product Assessment;
- Gate II: Preliminary Project Review, which consists of Causes for Corrective Action and the Product Dissection Plan;
- Gate III: Coordination Review, which includes a Component Summary, Design Revisions, a Solid Modeled Assembly, and an Engineering Analysis apposite to the vital mechanics of the product;
- Gate IV: Critical Project Review, which provides a step-by-step account of the product's reassembly, articulated in Product Reassembly Plan;
- Gate V: Delivery, which marks submission of the final edition of the technical report in its entirety.
Motivation for this maiden enterprise evoking application of fundamental engineering principles to technical communication, analysis and design arose from the stimulus of MAE 277 coursework, as alluded to earlier, with the Reverse Engineering Team Project amounting to a substantial percentage of the course material and overall grade. Apart from this, genuine and sustained enthusiasm about reverse engineering physical machinery, together with sound responsibility in attending to delegated work, thereby enabling submittal of deliverables per deadline, proved to be the lone additional catalyst necessary for constructive progress during the course of the project.
What follows is the summation of a collective effort at reverse engineering the UT 15151 Homelite® VersaTool™ line trimmer within a period of approximately four months.
For the duration of the Fall 2009 semester at SUNY-Buffalo, group 29 of MAE 277 immersed itself in a Reverse Engineering Team Project centered on the UT 15151 Homelite® VersaTool™ line trimmer. Throughout the project’s development, the group’s collective toil adhered to a structured agenda as set forth by the presiding instructor of the course. As such, the body of components constituting the project, and the group’s management of the tasks involved therein, lends itself to the following overview.
In keeping with the coordination of labor as facilitated by the group’s Gantt chart, dissection was anticipated to last ten days, mainly owing to conflicting personal schedules among members. This inconvenience and difficulty in securing mass group work, however, amounted to a rather serendipitous boon to work on the project; that is, were all members to convene at an arranged time at the product dissection lab furnished by the School of Engineering and Applied Sciences, confusion and congestion of workflow would have proved inevitable.
Gate I: Request for Proposal
Below are arranged, in sequence, links to the subsections constituting the Request for Proposal.
Date Submitted: October 10, 2009
Gate II: Preliminary Project Review
The following links entail the Causes for Corrective Action and the Product Dissection Plan of the Preliminary Project Review.
Date Submitted: October 30, 2009
Gate III: Coordination Review
The links below lead to the subsections (Component Summary, Design Revisions, Solid Modeled Assembly, and Engineering Analysis, respectively) comprising the Coordination Review. Access to the subsection References to Supplementary Material is provided in the Engineering Analysis, the content of which corresponds with the noted references to outside literature and kindred online sources of the former.
Date Submitted: November 30, 2009
Gate IV: Critical Project Review
The following links to the Product Reassembly Plan constituting the Critical Project Review.
Date Submitted: December 7, 2009
Gate V: Delivery
This signals the completion of the Reverse Engineering Team Project on the UT 15151 Homelite® VersaTool™ line trimmer. All content represented herein constitutes the technical report of group 29 as was formally concluded and submitted on the final delivery date.
Date Submitted: December 14, 2009
List of Tables and Figures