Group 21 2012 Management
This is a reference page for Group 21. The timeline contains each gate and what is to be finished. Specific tasks were assigned to each group member and due dates were given. Meeting minutes and group assignments can be found here. Meeting minutes will contain information concerning the gates and other issues that concerns the group. This page will be updated weekly.
Table 1 has the roles and responsibilities of each group member. Their contact information is also given. Each group member will be expected to fill these roles to the best of their abilities.
Table 1: Group 21 Roles, Responsibilities and Contact Information
|Nicholas Harrison||Task Manager||His responsibilities include assigning tasks to be finished. Problems and concerns of the group should be brought to him.||email- email@example.com|
|Jonathan Hughes||Dissection Expert||His responsibilities include dissection and reassembling the product. He has the most experienced so any questions concerning those parts should be directed towards him.||email- firstname.lastname@example.org|
|Elizabeth Moon||Photographer||Her responsibilities include overseeing the dissection and reassembly, noting any problems that may have occurred, while taking photographs. She will also be responsible for one design revision.||email- email@example.com|
|Garrett Rice||Mechanisms Expert||His responsibilities will include mechanism analysis. Any questions concerning this topic should be brought to him.||email- firstname.lastname@example.org|
|Tiffany Vinette||Project Manager/Wiki Expert||Her responsibilities include programming the wiki, allowing for appropriate technical communication. All finished parts of the gates are to be sent to her by email before the due date. She is also responsible for the project management portion of the project and updating meeting minutes. She will send out additional emails containing meeting minutes and tasks to be finished for the week. Any non technical problems concerning the group should be brought to her.||email- email@example.com|
Updated 12/1- Role changes
Table 2 shows our goals and due dates of each gate. We have laid out our schedule for the rest of the semester to help us keep on track and not fall behind. The schedule will be updated weekly and as tasks are completed.
Table 2: Weekly Schedule
|Week of Sept 10||Week of Sept 17||Week of Sept 24||Week of Oct 1||Week of Oct 8||Week of Oct 15||Week of Oct 22||Week of Oct 29||Week of Nov 5||Week of Nov 12||Week of Nov 19||Week of Nov 26||Week of Dec 3||Week of Dec 10|
|Section 1: The Four Factors|
|Section 2: Product Complexity|
|Section 3: Product Cost and Ownership|
|Turn in Product Proposal||Due 9/12|
|Turn in Gate 1||Due 10/8|
|Preliminary Project Review|
|Turn in Gate 2||Due 10/26|
|Cause for Corrective Action|
|Solid Modeled Assembly|
|Turn in Gate 3||Due 11/16|
|Cause for Corrective Action|
|Turn in Gate 4||Due 11/30|
|Finalization of Deliverables|
|Oral Presentation||Date: Dec 5|
|Turn in Gate 5||Due 12/ 14|
|Gate 1 Tasks|
|Gate 2 Tasks|
|Gate 3 Tasks|
|Gate 4 Tasks|
|Gate 5 Tasks|
The meeting minutes include where the meeting was held, any tasks assigned to certain group members, due dates for those specified tasks, and any other issues brought up during the weekly meeting.
Monday Meeting Minutes
- Determined the time and date of dissection.
- Will meet Tuesday, October 23, 9am to 11pm in the lab.
- Lab is located in 621 Furnas.
- If we do not finish within the two hours, we will find another time to meet.
- Added Tuesday: We will meet Wednesday, October 24, 10am to 12 pm, in the lab to finish dissection.
- Where: Knox 104
- When: 4 pm
- Who: Nick and Tiffany
- What: Made assignments for gate 2 parts
- Project Management-Tiffany
- Product Archaeology- Tiffany and Nick
- Determined group issues will be discussed at a meeting with the professors
- Will meet Thursday , November 1, 11:30am in office hours.
- Office hours are held in 203 Furnas Hall
- Hours each group member spent on Gate 2
- Tiffany- 30
- Nick- 5
- John- 3
- Liz- 1
- Garrett- 1
- Met in the dissection lab
- Started work on Gate 3
- Worked from 10:30am to 11:30am
- Who was there: John, Liz, Tiffany, Nick
- Who was supposed to be there: everyone
- Will meet Tuesday, November 6. Time and place TBD.
- 2pm in the basement of Capen Library
- The meeting lasted about 15 minutes.
- Our agenda was to split up the parts for gate 3.
- Cause for corrective action- Tiffany
- Component summary- John
- Product analysis- Nick and Tiffany
- Solid Modeled Assembly- Started by Nick
- Engineering Analysis- Liz
- Design Revisions- Garrett
- The parts will be finished and sent to Tiffany via email by 5pm on Wednesday
Nov 19: No meeting was held this week. Have a good holiday!
- We will meet Tuesday, Nov 27 from 9-11am to reassemble our product.
- Additional meetings will be added if needed
- We will meet again Wednesday, Nov 28 at 10am to finish reassembly.
- Each group member was assigned a part to finish for Gate 4.
- Parts are due Thursday Nov 29 at 5pm to Tiffany's email.
- Cause for Corrective Action- Tiffany
- Product Reassembly- Two parts
- John- Explain the assembly process. Include:
- the tool used
- a description of what you did
- how long each step took
- how the product was originally assembled
- Liz- Any challenges we faced during reassembly and describe how they were overcome.
- Mechanisms- Nick
- Design Revisions- For this part, each group member will make one change for the product at the system level.
- change or elimination must address one or more GSEE factor
- change or elimination must improve performance, serviceability, cost, etc.
- keep in mind target audience and price point when making changes
- We have to make one of these changes into a presentation that is also due Friday.
- Someone will present to the class next week.
- Please send your parts to me in a format that will be easy to put up on the website and that follows good technical communication guidelines.
- Edit: Nov 29. Garret will be making the slide show and presenting to the class