Difference between revisions of "Group 15 - Skil 7 1/4 in Circular Saw"

From GICL Wiki
Jump to: navigation, search
(Executive Summary)
(Project Overview)
Line 7: Line 7:
  
 
== Project Overview ==
 
== Project Overview ==
 +
 +
  
 
===Team Members===
 
===Team Members===
  
*Nicholas Grieco (nlgrieco@buffalo.edu)
+
*Nicholas Grieco (nlgrieco@buffalo.edu) - Group Manager/Supervisor
*Theodore Nalesnik (trnalesn@buffalo.edu)
+
*Theodore Nalesnik (trnalesn@buffalo.edu) - Co-manager/Wiki Specialist
*Joshua Beres (jjberes2@buffalo.edu)
+
*Joshua Beres (jjberes2@buffalo.edu) - Group Documenter/Modeling Expert
*James Pullano (jamespul@buffalo.edu)
+
*James Pullano (jamespul@buffalo.edu) - Dissection & Reassembly  Technician
*Colin Mutton (colinmut@buffalo.edu)
+
*Colin Mutton (colinmut@buffalo.edu) - Communication Director
  
 
== Gate 1: Project Planning==
 
== Gate 1: Project Planning==

Revision as of 18:03, 8 December 2012

Contents

Executive Summary

(Summary Here)

Skilsaw15.jpeg
Figure 1. Skil 7 1/4" Circular Saw

Project Overview

Team Members

  • Nicholas Grieco (nlgrieco@buffalo.edu) - Group Manager/Supervisor
  • Theodore Nalesnik (trnalesn@buffalo.edu) - Co-manager/Wiki Specialist
  • Joshua Beres (jjberes2@buffalo.edu) - Group Documenter/Modeling Expert
  • James Pullano (jamespul@buffalo.edu) - Dissection & Reassembly Technician
  • Colin Mutton (colinmut@buffalo.edu) - Communication Director

Gate 1: Project Planning

Gate 1 includes the initial assessment of both the product and the group members.

Gate 2: Product Dissection

Gate 2 includes the physical dissection of the product and an analysis of the subsystems found within it.

Gate 3: Product Analysis

Gate 3 includes a detailed analysis of the product on a component and subsystem level.

Gate 4: Product Explanation

Gate 4 includes the physical reassembly of the product and an analysis of all the information gathered in order to arrive at conclusions about it.