Electric Razor

From GICL Wiki
Revision as of 22:14, 30 January 2008 by JerecRicci (Talk | contribs)

Jump to: navigation, search

Bucknell Mechanical Design Home

Contents

Electric Razor

Figure 1: Conair Electric Razor Before Disassembly
Figure 2: Conair Electric Razor Without Back Parts













Function

This electric razor was manufactured by Conair. It is used for personal grooming, such as shaving or trimming of facial hair. It is able to provide a close shave or cut longer hair with included attachments.

How It Shaves

We will add a summary here.

Parts

The table belows lists the components for the Conair Electric Razor:

Table 1: Conair Electric Razor Component List
Part # Part Name Category Function Material Picture
1 Primary Housing Structural Component Provides a mount for all other parts, user holds this part Plastic
FrontCasing.jpg
2 Electric Motor Input Moves the blade Metal
DVHousing.JPG
3 Battery Door Structural Component Covers and holds batteries in place plastic
DVLargeStep.JPG
4 Upper Housing Structural Component Holds taper control switch and serves as a mount for cutting heads Plastic
DVDockMotor.JPG
5 Blade Base Mount Motion Conversion Element Serves as a mount for both blades and converts the motion of the motor output shaft to the side to side motion of the blade Plastic with metal springs
DVRail.JPG
6 Stationary Blade Structural Element Guides hairs to be cut and serves as an anvil for the moving blade Metal
DVGears.JPG
7 Moving Blade Output Cuts the hairs that have been guided by the stationary blade Metal
DVCPU.JPG
8 Snap Mount Structural Element The blade base mount or nosehair trimmer snaps into the tabs on this part Metal
DVEject.JPG
9 Screws Structural Holds device together Metal
DVHeadMotor.JPG