Black and Decker Dustbuster

From GICL Wiki
Revision as of 12:35, 28 January 2008 by ThomasCleere (Talk | contribs)

Jump to: navigation, search

Parts

Listed below is the Bill of Materials for the Black and Decker Dustbuster:

Table 1: Black and Decker Dustbuster Bill of Materials
Part # Part Name Category Function Material Picture
1 Battery Pack Input Powers the vacuum. 8 Recyclable Rechargable Nickel Cadmium batteries with wire and metal connections.
Badbottomdiskholder.JPG
2 Impeller Output Creates suction for the vacuum. Plastic
Badscrews.JPG
3 Motor with Fan Input Motor spins the impeller while the spinning fan pulls heat from the motor. Steel outer shell with a plastic fan and coils of copper wires
Badtopdiskholder.JPG
4 Speed controller Motion Conversion Element Allows for varying the speed of the motor and impeller. Plastic plates with copper connectors
Badwasher.JPG
5 Electric Circuitry Input (?) Supplies the appropriate current to the motor. Plastic base with brass connectors and one resistor
Blackanddeckerhandle.JPG
6 Outer Plastic Casing Structural Components Protects the inner working parts and provides safety for the user. Plastic
Blackanddeckerguard.JPG
7 Motor Shaft Transmission Connects the motor to the impeller and causes the impeller to turn when the motor does. Steel
Blackanddeckertransmission.JPG
8 Charging station Input Charges the batteries inside of the dustbuster. Plastic with metal connections
Camera Spindle.JPG