Difference between revisions of "Black and Decker Dustbuster"

From GICL Wiki
Jump to: navigation, search
Line 61: Line 61:
 
| align="center"|Charges the batteries inside of the dustbuster.
 
| align="center"|Charges the batteries inside of the dustbuster.
 
| align="center"|Plastic with metal connections
 
| align="center"|Plastic with metal connections
| [[Image:Camera Spindle.JPG  |center|thumb|50px]]
+
| [[Image:Camera charging.JPG  |center|thumb|50px]]
 
|-
 
|-

Revision as of 17:25, 29 January 2008

Parts

Listed below is the Bill of Materials for the Black and Decker Dustbuster:

Table 1: Black and Decker Dustbuster Bill of Materials
Part # Part Name Category Function Material Picture
1 Battery Pack Input Powers the vacuum. 8 Recyclable Rechargable Nickel Cadmium batteries with wire and metal connections.
Battery pack.JPG
2 Impeller Output Creates suction for the vacuum. Plastic
Impeller2.JPG
3 Motor with Fan Input Motor spins the impeller while the spinning fan pulls heat from the motor. Steel outer shell with a plastic fan and coils of copper wires
Motor.JPG
4 Speed controller Motion Conversion Element Allows for varying the speed of the motor and impeller. Plastic plates with copper connectors
Switch.JPG
5 Electric Circuitry Input (?) Supplies the appropriate current to the motor. Plastic base with brass connectors and one resistor
Circuit.JPG
6 Outer Plastic Casing Structural Components Protects the inner working parts and provides safety for the user. Plastic
Casing.JPG
7 Motor Shaft Transmission Connects the motor to the impeller and causes the impeller to turn when the motor does. Steel
Shaft.JPG
8 Charging station Input Charges the batteries inside of the dustbuster. Plastic with metal connections