Electrolux Dishwasher

From GICL Wiki
Jump to: navigation, search


Figure 1 shows a schematic of the Electrolux Dishwasher that was dissected for obtaining educational material. An Electrolux dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against soiled surfaces. Each cycle begins with a pre-drain. Next, the dishwasher fills with water until the filter area is covered with water. Water is then pumped through the filter and spray arms. Soil particles go down the drain as the water is pumped out and replaced with clean water. The number of water fills vary with the cycle being used.

Figure 1: Electrolux Dishwasher Schematic (Source: Electrolux Use & Care GuideFileicon-pdf.png)

Disassembly of Electrolux dishwasher

This section provides step-by-step instructions on how to disassemble a 24 inch built-in Electrolux dishwasher. It explains how to access and remove components from a dishwasher and in what sequence.

Bill of Materials

A complete Bill of Materials (BOM) prepared following the dissection is shown in this section.

Click here: Electrolux_Dishwasher_BOM

Electrolux Dishwasher DSM: Electrolux_Dishwasher_DSMFileicon-pdf.png

Back to Dishwasher